0.3-6.5/0.3-4mm Wood Carving Drill Chuck Hang Shank with Flexible Shaft for Electric Grinding Drill

Descriptions:0.3-6.5/0.3-4mm Wood Carving Drill Chuck Hang Shank with Flexible Shaft for Electric Grinding Drill
Specifications:Type:A – Black rubber flexible shaft;
B – Silver stainless steel flexible shaft;
C – 0.3-6.5mm golden hang shank with rubber flexible shaft;
D – 0.3-4mm silver hang shank with rubber flexible shaft.
SizeA:Soft shaft length:990mm Soft shaft diameter:9.4mm Shaft length:790mm Shaft diameter
6mm Soft shaft material:rubberC:Handle – 148*26mmD:Handle – 139*26mmWeightA – 326gB – 314gC – 497gD – 478g
Features:- Multi-purpose machine for metal grinding, wood cutting, jade drilling and jade polishing;
– The product uses an electric grinder with a flexible shaft to easily solve pipes, interfaces and corners that were difficult to reach;
– The handle is small and easy to grasp, suitable for fine polishing, engraving and sanding operations;
– Rubber design, light weight, more suitable for long hours of operation;
– The length of the flexible shaft is approximately 890mm, which extends the working range.
Note:Before using the soft shaft, it is best to install the machine first. After running for 15 minutes at low speed, the parts inside will be run-in. There will be a little heat within 1-2 hours after use. After the running-in period, it can be used normally without odor.
Instructions:- When inserting, the bump on the flexible shaft is aligned with the inner notch of the tail of the hanging mill, and then squeezed after pressing;
– Small wrench to tighten the clamping head (clockwise tightening, counterclockwise loosening)
– Replace the hose core:First, unscrew the internal screws with a hexagon socket, then remove the entire shaft to replace.
Package Included:1 Pc x Flexible Shaft / Flexible Shaft with Hang Shank
More Details: