Product Overview: The BTMOS-V2.0 is a sophisticated, upgraded power expansion module dedicated to resolving difficulties associated with outdated, high-power hot bed power expansion units, namely excessive heat and inability to work with high-powered hot beds.
Key Features:
-
Compatibility: The BTMOS-V2.0 hot bed power expansion module is designed to conveniently connect with high-powered hot beds, thereby absorbing higher power levels and reducing risks associated with overheating.
-
Capacity: Assuming optimal heat dissipation, the module operates at a maximum current of 15A. Usage beyond 15A is highly discouraged to prevent potential damage.
-
Dimensions: The unit measures approximately 50mm by 60mm in size.
Wiring Guide:
-
DCIN: The positive pole links to the power supply, and the negative pole connects to the minus of the power supply. It supports a +12V or +24V power supply, though using a +24V power supply is recommended.
-
HOTBED: This will connect to the hot bed line – and regardless of polarity.
-
J2: This link should plug into the hot bed control port found on the main control board – irrespective of polarity.
Usage Tips:
-
Power Connection: Pay close attention to the power supply’s polarity. Reversing this connection can accidentally damage the module and result in unnecessary losses.
-
Module Placement: Avoid positioning the module anywhere with a high density of wires. This precaution aids in reducing the module’s heating load, thus increasing safety.
-
Operational Safety: While the module is active, steer clear of making contact with the bottom conductor to prevent a short circuit that can damage the device.
Product Kit: Each package includes three Heated Bed Expansion Power Module unit, accompanied by wiring.
