Feature:1) 2 channels, both are respectively controlled by independent knobes;
2) 150MHZ analog channel bandwidth;
3) 1 GSa/s real-time sample rate;
4) 8M memory depth;
5) Vertical range 2mV/div ~ 10V/div;
6) Built-in 1 CH 5MHz waveform generator;
7) Vertical resolution
8bit;
8) Trigger:Edge, Pulse width, Video, Slope, Overtime, Window, Pattern, Interval, Delay, UART, LIN, CAN, SPI, IIC;
9) CAN decode and protocol analysis:RS232/UART、I2C、SPI、CAN、LIN
10) Can save as multiple data formats, such as setting, waveform, referance waveform, CSV, picture;
11) 5 bits digital voltage meter and 6 bits hardware frequency indicator function;
12) 32 kinds of auto measurements with statistics, real-time statistics of maxmum, minimum, standrad deviation and etc.;
13) 2 sets of digital voltmeter;
14) Support threshold testing, free measurements within the screen;
15) Abundant SCPI remote command control;
16) Many external interface:USB Host/Device.
Product Model(NOTE:Click on the model to reach the purchase link of the corresponding model)：Model
ChannelsBandwidthSampling RateStorage DepthSignal Source (AWG)>>DSO2C102CH100MHz1GSa/S8M/>>DSO2C152CH150MHz1GSa/S8M/>>DSO2D102CH+1CH100MHz1GSa/S8M1CH>>DSO2D152CH+1CH150MHz1GSa/S8M1CH>>Please Click Here to Download the English User Manual>>Click to Download DSO2000 Software
Specifications:Model:DSO2D15
Channel:2 CH+1CH
Bandwidth:150MHz
Sample rate:1GSa/S
Memory depth:8M
AFG:1CH
Parameters ModelDSO2D15DSO2D10DSO2C15DSO2C10Bandwidth150MHz100MHz150MHz100MHzOscilloscope channels2CH2CH2CH2CHWaveform generator1CH1CH – -OscilloscopeSample rate1GSa/s (single channel) 500MSa/s (two channels)AcquisitionSamplingSample dataPeak-to-peak valueDisplay high frequency and random burrAverageAverage waveform, times:4, 8, 16, 32, 64, 128High resolutionUp to 12bitInputInput couplingDC, AC, GNDInput impedance1MΩ±2% ‖20pF±3pFProbe attenuation factor1X, 10X, 100X, 1000XVoltage classes300V CAT IIMaximum input voltage300VRMS (10X)HorizontalWaveform interpolation(sin x)/xMaximum record lengthSingle channel maximum 8MTwo channels maximum 4MHorizontal scale range2ns/div~100s/div 1, 2, 5 step by stepTime base modeY-T, X-Y, Roll Zero offset±0.5 div×minimum time base gearSample Rate and Delay Time Accuracy±25ppmClock drifting≤±5 ppm/yearIncrement Time Measurement Accuracysingle, ”acquisition” mode(Full Bandwidth)±（1 sample interval+100ppm×reading+0.6ns）＞16 times averages±（1 sample interval+100ppm×reading+0.4ns）Sample interval=sec/div÷200Sample Rate and Delay Time Accuracy±50ppm（at any interval greater than 1ms）VerticalModelDSO2D15DSO2D10DSO2C15DSO2C10Bandwidth150MHz100MHz150MHz100MHzRising time in BNC position (typical)2.3ns3.5ns2.3ns3.5nsVertical resolution8 bits resolution, each channel samples simultaneouslyVertical sensitivity2mV/div to 10V/divOffset range2mV/div to 20mV/div, ±100mV; 50mV/div to 200mV/div, ±1V;500mV/div to 2V/div, ±10V; 5V/div to 10V/div, ±50VMathematical operation+, -, ×, ÷, FFTFFTWindow:Rectangular, Hanning, Hamming, Brackman, Bartlett, flat top windowBandwidth Limit20MHzBass response（-3db）In BNC position ≤ 10HzVertical gain accuracyIn ”normal” or ”average” acquisition mode, the accuracy of 10V/div to 10mV/div is ±3%;In ”normal” or ”average” acquisition mode, the accuracy of 5mV/div to 2mV/div is ±4%DC offset accuracy±0.1 div±2 mV±1% offset valueVoltage measurement repeatability, average acquisition modeUnder the same setting and environment, ≥16 waveforms are sampled, △V of any two averages:±（3%×value+ 0.05 div）Note:Bandwidth reduced to 6MHz when using a 1X probeTriggerTrigger typeEdge, Pulse width, Video, Slope, Overtime, Window, Pattern, Interval, Delay, UART, LIN, CAN, SPI, IICTrigger level range ±5 divisions from the center of the screenTrigger modeAuto, general, singleLevelCH1~CH2±4 divisions from the center of the screenEXT0~3.3VHoldoff range8ns~10sTrigger level accuracyCH1~CH20.2 div×volts/div within ±4 divisions from the center of the screenEXT±（Set value× 6%+40mV）Edge triggerSlopeRising edge, falling edge, rising or falling edgeSignal sourceCH1, CH2, EXTPulse width triggerPolarityPositive polarity, negative polarityCondition(When), !=, =Signal sourceCH1~CH2,Pulse width range8ns ~ 10sAccuracy8nsVideo triggerSignal standardNTSC, PALSignal sourceCH1~CH2SynchronizationScanning line, line number, odd field, even field, all fieldSlope triggerSloperise, fallCondition(When), !=, =Signal sourceCH1 ~ CH2Time range8ns ~ 10sAccuracy8nsOvertime triggerSignal sourceCH1~CH2，PolarityPositive polarity, negative polarityTime range8ns ~ 10sAccuracy8nsWindow triggerSignal sourceCH1~CH2 Pattern triggerPattern0:low level; 1:high level; X:ignoreLevel（signal source）CH1~CH2Interval triggerSloperise, fallCondition(When), !=, =Signal sourceCH1~CH2Time range8ns ~ 10sAccuracy8nsDelay triggerPolarityPositive polarity, negative polarityCondition(When), !=, =Signal sourceCH1~CH2Time range8ns ~ 10sAccuracy8nsUART triggerCondition(When)start, stop, data, odd-even check, reception errorSignal source(RX/TX)CH1~CH2 Data formatHex (hexadecimal)Data length1 byteData bit width5 bit, 6 bit, 7 bit, 8 bitOdd-even checknone, odd, evenFree levelhigh, lowBaud rate (optional)110/300/600/1200/2400/4800/9600/14400/19200/38400/57600/115200/230400/380400/460400 bit/sBaud rate(user-defined)300bit/s~334000bit/sLIN triggerCondition(When)Interval field, synchronization field, ID field, synchronization error, identifier, ID and dataSignal sourceCH1~CH2Data formatHex (hexadecimal)Baud rate (optional)110/300/600/1200/2400/4800/9600/14400/19200/38400/57600/115200/230400/380400/460400 bit/sBaud rate(user-defined)300bit/s~334000bit/sCAN triggerCondition(When)Start bit, remote frame ID, data frame ID, frame ID, remote frame data, data frame data, wrong frame, all errors, answer error, overload frameSignal sourceCH1~CH2Data formatHex (hexadecimal)Baud rate (optional)10000, 20000, 33300, 500000, 62500, 83300, 100000, 125000, 250000, 500000, 800000, 1000000Baud rate(user-defined)5kbit/s~1Mbit/s SPI triggerSignal sourceCH1~CH2Data formatHex (hexadecimal)Data bit width4, 8, 16, 24, 32IIC triggerSignal source (SDA/SCL)CH1~CH2Data formatHex (hexadecimal)
Data index0~7Opportunity(condition)Start bit, stop bit, no response, address, data, restartMeasurementCursorVoltage difference between cursors △VTime difference between cursors △TReciprocal of △T, in Hertz (1/△T)Auto measurementfrequency, period, mean, peak-to-peak, RMS, minimum, mixmum, rising time, falling time,
width, – width, base, top, middle, amplitude, overshoot, preshoot, rising edge phase difference, falling edge phase difference,
duty, – duty, period mean, PRMS, FOVshoot, ROVshoot, BWIDTH, FRF, FFR, LRR, LRF, LFR, LFFDVMData sourceCH1, CH2Measurement typeDC effective valueAC effective valueDCFrequency meterhardware 6 bits frequency meterArbitrary waveform generatorChannel1Sample rate200MSa/sVertical resolution12 bits Maximum frequency25 MHz Standard waveformssin、square, pulse, triangular, sampling wave, index, noiseArbitrary waveformArb1, Arb2, Arb3, Arb4SinFrequency range0.1Hz~25MHzSquare/pulseFrequency range0.1Hz~10MHzTriangular waveFrequency range0.1Hz~1MHzSampling waveFrequency range0.1Hz~1MHzIndexFrequency range0.1Hz~5MHzNoise Arb1Frequency range0.1 Hz to 10 MHz Arb2Frequency range0.1 Hz to 10 MHz Arb3Frequency range0.1 Hz to 10 MHz Arb4Frequency range0.1 Hz to 10 MHz Waveform length8KSaFrequencyAccuracy100 ppm (10 kHz)Resolution0.1 Hz or 4 bits，take the greater oneAmplitudeOutput range10mV~7Vp-p (high impedance)5mV~3.5Vp-p (50Ω)DC offsetRange±3.5 V, high impedance±1.75 V, 50 ΩResolution100 μV or 3 bits, take the greater oneAccuracy2% (1 kHz)Output impedance50 ΩGeneral specificationsDisplayDisplay type7” diagonal TFT liquid crystalDisplay resolution800 (horizontal)*480 (vertical) pixelsDisplay colour16 million colours (24 bits true colour)Persistence timeminimum, 1 s, 5 s, 10 s, 30S, infiniteDisplay typedot, vectorDisplay brightnessadjustableGrid typeadjustableGrid brightnessadjustableInterfaceStandard interfaceUSB Host，USB DeviceGeneral specificationsProbe compensator outputOutput voltage, typicalabout 2Vpp input ≥1MΩ loadFrequency, typical1kHzPower supply100-120VACRMS(±10%), 45Hzto 440Hz, CATⅡ120-240VACRMS(±10%), 45Hz to 66Hz, CATⅡPower consumptionFuseT, 3.15A, 250V, 5x20mmOperating temperature0~50 °C (32~122 °F)Storage temperature-40~+71 °C (-40~159.8 °F)Humidity≤+104℉(≤+40°C):≤90% relative humidity106℉~122℉ (+41°C ~50°C):≤60% relative humidityAltitudeOperating and nonoperating3, 000m (10, 000 feet)Mechanical shockRandom vibration0.31 g RMS from 50Hz to 500Hz,10 minutes on each axisNonoperating2.46g RMS from 5Hz to 500Hz,10 minutes on each axisOperating50g, 11ms, half-sine waveMechanicalSize318 x 140 x 150mm (length x width x height)Weight2900g
Package Includes:Details pictures:
Reviews
There are no reviews yet.