Features:Integrated PCB, whose display quality is better than traditional screen.
Anti-static ability is up to 4KV.
With SD card slot for easily printing.
Equipped with its own encoder, parameter setting.
Support MKS series and ramps motherboard via modifying firmware.
Multi-language display, set by marlin firmware.
Manual and firmware download address (please copy the following link to browser):Github Link:https://github.com/makerbase-mks?tab=repositories
Note:LCD12864A can’t work with MKS SGen_L, Robin lite3.
MKS LCD12864A:Work together with MKS Gen_L, MKS Gen, MKS Base and MKS Rumba+.
Marlin Enable Setting:1.Screen Contrast Setting
Follow processes:Arduin/ Libraries/ U8glib/ Utility to find out “u8g_dev_uc1701_mini12864.c” . You can install “notepad++” to check this document.The yellow frame below is screen contrast( the contrast will change as the figure value increasesor reduces).
Default value is 0x027
The contrast value of LCD12864A is 0x032
The same as mini 12864, the enable item(yellow highlighted)
Note:The firmware can match one type of screen only. It may cause display error if setting up several types of screen.If the firmware is enabled and refreshed, but the screen display is blurred or not displayed. The reason this may be caused is that there is no contrast setting or no saving. Simply set the contrast to 0x032, save it and re-use arduin to update the firmware.
Modify screen contrast in Marlin 2.0
1. Enable the“#define MKS_MINI_12864” in configuration.h
2.In the Conditionals_post.h file.Change the value of MKS_MINI_12864 CONTRAST “LCD_CONTRAST_INIT” to 220 (adjusted according to the actual display effect)
The modification is complete. Recompile the upload firmware