Product Specifications:
This product consists of a Stepper Motor and a Lead Screw, available in two lead screw lengths: 300mm and 400mm.
Stepper Motor Details:
The model number is 17HD40005-300N or 17HD40005-400N. It has a current per phase of 1.5A with a step angle of 1.8 degrees. This hybrid type motor with 2 phases is ROHS and CE certified. The holding torque is 4000. The step angle accuracy is ±5% (full step, no load), the resistance accuracy is ±10%, and the inductance accuracy is ±20%.
Other attributes include a temperature rise of 80°C Max (rated current, 2 phase on) with an operational ambient temperature range between -20°C to +50°C. It also has an insulation resistance of 100M Min, 500VDC, and an insulation strength of 500VAC for one minute.
The 17HD40005-300N/400N Stepper Motor has numerous specifications, including a step angle of 1.8 degrees, a motor length of 40mm, a shaft diameter of 5mm, a rated current of 1.5A, and a phase resistance of 1.6 Ohms.
Furthermore, it features a phase inductance of 3.8 mH, a holding torque of 420 mN.m, a detent torque of 18 mN.m, a rotor inertia of 57 g.cm², and is equipped with 4 lead wires.
Lead Screw Details:
The lead screw is made from high-quality imported 304 stainless steel, has a diameter of 8mm, and is available in two lengths: 300mm and 400mm. The lead of the thread is 8mm. The surface is polished to ensure no burrs, and the T8 nut slides smoothly up and down.
Key Features:
- Motor: Includes a rear cover with an adjustment nut to ensure no axial gap under load.
- Lead Screw: High-quality imported material, polished surface, and smooth operation.
Technical Specifications:
- Application Scope:
This specification applies to the 17HD40005-300N and 17HD40005-400N hybrid stepper motors. - Type and Specifications:
- Electrical Principle and Outline Diagram: See the outline diagram.
- Drive Method: Constant current chopper drive.
- Excitation Method: 2-phase excitation (2-phase 4-step operation), capable of forward and reverse rotation.
- Rotation Direction: Clockwise (C.W.) when powered in the sequence AB-BC-CD-DA, viewed from the shaft end.
- Rated Current (Single Phase): 1.5A DC.
- Power Supply Voltage: 12-36V.
- Step Angle: 1.8°.
- Insulation Class: Class B insulation.
-
- Operating Conditions: Ambient temperature: -20°C to +50°C; Relative humidity: ≤90% MAX; Installation position: Shaft horizontal or vertical.
- Test Conditions: The above parameters are measured under normal test atmospheric conditions.
- Winding DC Resistance (25°C): 1.6Ω ±10%.
- Winding Inductance: 3.8mH ±20%.
- Detent Torque: 18mN.m REF.
- Holding Torque (Two-phase rated current): ≥420mN.m (I=1.5A).
- Maximum No-load Starting Frequency: ≥1300pps.
- Maximum No-load Running Frequency: ≥8000pps.
- Temperature Rise: <80K.
- Step Angle Accuracy: 1.8° ±5%.
- Rotor Inertia: 57g.cm².
- Motor Weight: 0.39Kg/PC REF.
- Insulation Resistance: The insulation resistance between the stator core and terminals should be greater than 100MΩ (measured with a 500V DC megohmmeter).
- Dielectric Strength: The stator core and terminals should withstand AC600V/1S without breakdown, with a leakage current of less than 1mA.Parameters:
- Materials, Packaging, Transportation, and Storage:
- Materials: The product complies with EU RoHS directive requirements.
- Packaging: The motor is securely packaged with the following:
- Outer Packaging: Corrugated cardboard box.
- Inner Packaging: Foam plastic.
- Marking: The outer box is marked with “17HD40005-300N” or “17HD40005-400N,” including the quantity and manufacturer information.
- Transportation: Handle with care during transportation, avoiding collisions and impacts. Do not store with corrosive substances.
- Storage: Store in a clean, well-ventilated environment with an ambient temperature of -5°C to +40°C and relative humidity ≤90%. Avoid exposure to corrosive gases.
Package Includes:
1 x Lead Screw (300mm or 400mm)
1 x 17HD40005-300N/400N Motor
1 x T8 Nut
Product Images:
