Important usage instructions:
✯ Before applying power, ensure that the positive and negative poles are linked accurately.
✯ Do not unplug or plug in the engine and the driver while power is on as it can easily damage the driver.
✯ Avoid adjusting the current while the engine is running. The advisable method is to detach the power source and the motor before turning on the power again.
✯ Adjustment of the potentiometer and voltage measurement should be done until the measured voltage aligns with the expected amount.
✯ Note: The driver or even motherboard may be damaged if the anti-driver is inserted.
✯ During the firmware burning process, it’s advisable not to connect the USB cable and the 12V power simultaneously. Connect the 12V power only after burning is completed through the USB cable.
Github: https://github.com/makerbase-mks/MKS-GEN_L
The package includes 1x Motherboard.
