Products Name:Product id:–>
Cutting depth adjustment:20mm
Features:- Keep the Dremel more steady, enhance flatness
– 45 degrees and 90 degrees can be adjusted
– Applicable for Dremel 4000, 400, 398, 395, 300, 285, 275, 200, 100, 8200, 800, 780
Usage:Step 1:Remove the housing cap A from the end of the tool and set housing cap aside. The original housing cap must be reinstalled when
this attachment is not used (Fig. 1).
Step 2 & 3:Loosen the collet nut and place your accessory in and tighten.
Note:The attachment is for ½” diameter accessories or smaller.
When inserting a bit into your Dremel Rotary Tool be sure that the bit is securely inserted into the collet.
Always use the wrench to tighen the collet nut to prevent the bit from loosening within the collet.
Do not use the Dremel Chuck.
Step 4:Thread the attachment B onto the threaded portion of the housing collar C (Fig. 2).
Step 5:Adjust the attachment B to the desired depth by loosening the wing knob D (Fig. 3).
Package Included:1 x Rotary Locator
There are no reviews yet.