Features:1. Wear-resistant, recyclable, reusable.
2. Easy to use in DIY operation.
3. Balance tiles in the same horizontal position.
4. Improve tile installation speed.
5. Reduce installer fatigue / pressure.
6. There is virtually no cracks, flat surface.
7. This reduces the need for sharpening and polishing.
8. Avoid shingles from movement during solidification.
Specifications:Material:High Quality PP
Stainless Steel
Color:Black+Orange
Scope of application:Masonry
Applicable Brick Gap:≧1.6 mm/0.63″
Applicable Tile Thickness:5-16 mm/0.2-0.06″
Size:7.4 x 3 cm/2.9*1.18″
Package Included:#1:50 x Steel Needle
#2:50 x Tile leveler
2 x Wrench
Use Tips:1.Lay the first tile, leaving more than 1.5 mm (with cross gaskets). Close to tile.
2.Insert T-pins along the gap between tiles.
3.Then rotate 180 degrees and the T-needle is stuck at the bottom of the two tiles.
4.Adjust the lid with a hand/special wrench until the two tiles are on the same level.
5.After leveling for about 5-6 hours, before the cement/adhesive is completely dried, rotate the lid in reverse and take out the 180 degree T needle until the word is removed.
