Product Specifications:
- DSD: PCM768, DSD512
- DSD: Native, DOP
- Analog input: 1 x 3.5mm (shared with analog output)
- Analog output: 1 x 3.5mm (shared with analog input)
- Headphone output: 1 x 3.5mm
- Playback time: An approximate 28 hours (headphone amp only), and approximately 7.5 hours (while using as a USB DAC/headphone amp)
- Headphone output: 293mW
- Distortion: 0.0009% (at 140mW)
- Gain: 0dB, 8.8dB
- Noise floor: 2.5uV, 6.5uV
- Decoding SNR: 119dB
- Supported audio formats: 16-32bit / 44.1-768kHZ DSD64-DSD256Dop DSD64-512 (native)
- Dimensions: 11CM x 6.8CM x 1.4CM
- Net weight: Approximately 155g
- Recommended Headphone Impedance: 16-300Ω
Key Features:
- Low output resistance: No higher than 0.4Ω
- High output power: Delivers up to 293mW @ 32 Ω, THD+N 0.0009%; and 114mW for a 300Ω load. You can select between 0dB and 8.8dB gain.
- Low noise: As low as 2.5uV at 0dB and 6.5uV at 8.8dB
- HiFi bypass or mega bass effect: You can select between the two.
- Wide audio format support: The NX4 DSD uses XU208+ ES9038Q2M architecture which supports 16-32bit/44.1-768kHz, DSD64- DSD256(Dop), and DSD64-512(native) audio formats.
- High SNR and low THD+N: Offers a 119dB SNR and the THD+N is a mere 0.0008% in USB DAC mode.
- Wide Frequency response range: The NX4 DSD provides a frequency response range of 20-100kHz.
- Robust construction: Comes with a full aluminium shell.
- Long playback time: Provides 28 hours playback for headphone amp and 7.5 hours for USB DAC/headphone amp.
- Power warning: The power LED of the NX4 DSD will turn red as a low power warning.
- Wide compatibility: Can play almost all types of audio sources as it supports 32bit/768kHz, DSD256(Dop), and DSD512(native) formats.
Package Contains:
- 1 x NX4 DSD Amplifier
- 1 x Micro USB to NX4 DSD Cable
- 1 x Type-C to NX4 DSD Cable
- 1 x Rubber Pad
- 1 x USB Charge Cable
- 1 x 3.5mm Cable
- 2 x Rubber Band
- 10 x Velcros
- 1 x User Manual
- 1 x Warranty Card
