Product Name: DM860 Stepper Motor Driver
Product ID:–
Features:
- Capable of driving 4-wire and 8-wire, two-phase stepper motor.
- Signal input: PUL+ and PUL- for control pulse signal ends; DIR+ and DIR- for directional signal ends; ENA+ and ENA- for enabling signal ends.
- Power-on parameter auto-tuning function equipped.
- Precision current control greatly reduces motor heating.
- Current is automatically reduced by half when at rest.
- Built-in micro-segment.
- Integrated with optically isolated signal input for strong anti-interference ability.
- Overvoltage, overcurrent, and other protection functions included.
To know more about the product, download our user manual here.
Specifications:
- Drive dimensions: 117 78 34mm.
- Mounting hole distance: 111mm.
- Maximum current: 7.2A, resolution: 0.1A.
- Subdivision range: 400~25600ppr.
- Pulse response frequency: 200KHz.
- DC power supply.
- Input voltage range: 24~80VDC or AC both OK.
- Power supply: >200W. Recommend 48VDC or 48V AC.
- Operating Temperature: -10℃~45℃.
Installation guidelines:
- Installation location: Can be installed horizontally or vertically (vertical installation is recommended). Attach it to the metal cabinet for efficient heat dissipation.
- Motor Interface: Connect A+ and A- with A phase winding of the stepping motor; B+ and B- with B phase winding of the stepping motor. Swap the A and B phase windings to reverse the motor direction.
- Setting Operating Current: Use the three dial switches of SW1-SW3 to set the driver’s output current, it has 8 levels.
- Indicator light: The driver has a red (fault indicator) and a green light (power indicator).
- Automatic half-current function: Set this function with the SW4 dial switch.
- Microstep subdivide setting: Use the SW5-SW8 four dial switches to set microstep subdivisions.
Package Included: 1 x DM860 Stepper Motor Driver
