Pixel Lark Wireless Microphone with Noise Cancellation for DSLR Camera and Smartphone

$252.99

In stock

Pixel Voical Lark Microphone Wireless Voice-Groomed Noise Cancellation Condensador Microfone Mic for DSLR Camera Smartphone
Pixel Lark Wireless Microphone with Noise Cancellation for DSLR Camera and Smartphone $252.99

Free shipping on all orders

  • 30 days easy returns
  • Tracking information available on all orders
Guaranteed Safe Checkout

Product Details:

The Pixel Frequency Range Receiver is a Lavalier Microphone that operates on the open 2.4GHz frequency spectrum. This property enables interference-free and unrestricted wireless transmission up to a distance of 656′ ft (100m).

The universal wireless system permits the recording of crystal-clear, distortion-free audios from your DSLR, camcorder, smartphone, or tablet. This feature is especially useful for filmmakers, vloggers, mobile journalists, and content creators.

This product also has an impressive noise reduction function that helps reduce both low-frequency noises like wind noise, environmental noise, and vibration noise, as well as high-frequency noises like howling and electronic noises.

Specifications:
The brand behind this product is Pixel, and its model name is Voical Lark. The transmission type of this product is UHF.

Features include a pre-polarised pressure transducer acoustic principle, an omnidirectional polar pattern, and an equivalent input noise @ maximum gain of 1.8dB (A-Weighted). It has a frequency range of 600MHz ± 10MHz, an external mic input of 100Hz – 10kHz, a maximum output level of 79dBu, and a maximum SPL of 100dB SPL (1kHz @ 1m).

The product also comes with an inbuilt Li-Po battery, rechargeable via USB-C. The battery life lasts up to 4 hours for transmitters, while the receiver can last up to 8 hours.

This product has computer connectivity through USB (for firmware update) and an operating system requirement for firmware update only if it is macOS 10.11 above Windows 10 and above.

In terms of physical factors, it has a clip-on pack form factor. The weight is TX:85g, RX:23g. It measures TX:55 × 46 × 15mm, RX:55 x 46 x 15mm.

The receiver specifications include a working frequency of UHF 600MHz±10MHz, a transmit power of >10dBm, an acceptance sensitivity, a signal to noise ratio of >70dB, and a working time of 8Hrs. Its battery capacity is 1200mAh and exerts power consumption up to 8Hrs. Charge hours take up to 2Hrs. The working distance is approximately 100 – 200 Meters (110-220 yards) without obstacles.

The packing list includes two transmitters, a receiver, two external antennas, a 3.5mm TRRS to TRRS audio cable, a 3.5mm TRRS to TRS audio cable, a 6.5 mm to 3.5mm audio adapter, a 3-in-1 Type-C charging cable, a charging cable, a USB-A to Type-C adapter, a cold shoe mount adapter, and a portable hard case.

12345678910