Product Features:
This product allows for external and internal temperature checks. By pressing and holding the “M”, you can access this function.
Temp Protection Warning: If the temperature goes higher or lower than the protection value, the “fire” will start to flash, the valve will automatically close or open, and adjust the temperature accordingly. Once the temperature is in the safe range, the “fire” will stop flashing, and the protection mode will be cancelled.
If the ”ERR” light is on, it indicates an issue with the sensor or the sensor mode. The temperature display will show “–“.
If “WIFI” begins flashing slowly, it means that the WiFi connection has failed.
It features an Anti-locking Function.
You can check the MAC Address when the thermostat is switched off. By pressing and holding “”, you can enter the checking mode.
Here’s how you connect to the internet:
Press “
On your APP, navigate to the Add Device page, and choose the relevant product type.
Following this, input the SSID and password to pair the thermostat with your device.
Installation:
This thermostat should be installed into an 86*86 box and powered by 220V AC. Remember, the power must be off before starting the installation process.
Installation Steps:
- Connect the wiring
- Connect the steel to the 86 box
- Secure the Power box and Panel
Advanced Settings:
When the thermostat is powered on, you can hold down the ” “(5s), press “M” to select the settings, and press ” ” to make your selection.
- Sensor Type: Options include Internal (00), External (01), Internal & External (02). The default setting is 00.
- High Temp Protection: Range 35~95℃. The default setting is 95℃. The “–” option cancels the protection.
- Low Temp Protection: Range 0~10℃. The default setting is 5℃. The “–” option cancels the protection.
- Swing: Range 0-9 ℃. The default setting is 2 ℃.
- Temperature Calibration: Range -9℃~+9℃. The default setting is 0℃.
- Highest target temp: Range 35~90℃. The default setting is 35℃.
- Lowest target temp: Range 0~30 ℃. The default setting is 5℃.
- Home mode target temp: The default setting is 24℃.
- Eco mode target temp: The default setting is 18℃.
- Away mode target temp: The default setting is 15℃.
To reset the system, press ” ” to change the “–” to “==” and then wait for 5 seconds.
To return to factory settings, press “ ” to switch the “–” to “==” and then wait for 5 seconds.
The package includes 1 x Zemismart Tuya WiFi Thermostat
Product Images:
