Introducing an accurate, easy-to-operate, high-precision measurement tool, settable to your specific needs. This tool also provides a strong resistance to interference, making it an impeccable choice for electronic measurement or industrial automation control. For maximum rigidity and to ensure it stays attached throughout its use, a high-quality fixing frame is included.
Specifications:
- Display Range: Our DF3 four-digit display can range from -1999 to +3300.
- Sample Time: The factory-setting sample time is set at 4 times per second, but can go between 2 to 128 times.
- Accuracy: The DF3-D has a soil accuracy rate of 0.5% F.S ±2Digit.
- LED Display: The readings are displayed via a red LED light.
- Frequency Range: The frequency ranges from 45Hz to 60Hz (max).
- Polarity Display: Whether it’s a positive or negative reading, it can display it all.
- Weight: This compact piece of equipment only weighs around 350g.
- Power Supply: Utilizes AC110V/AC220V. 50/60Hz power supply.
- Power Consumption: It has a low power consumption at about 3VA (220VAC 50Hz).
- Size: Perfectly sized with dimensions W96 x H48 x D65mm.
- Installation: Plate type.
The DF3-D DC Ammeter’s current, resolution, and test range are customizable according to your needs. The ranges vary from a minimum of DC300.0uA to a maximum of DC10.00 A. Please note that if it exceeds DC10A, a shunt test is required (the shunt is not included).
Changing the set value is simple. Press the ⟲ key for 3 seconds to enter the function setting menu mode. Use ︽ or ︾ to enter the next setting item. Move the cursor to the left and the digits will flash cyclically, give it another press and the value of the flashing digit should change. Once you confirm and save, the instructions will exit and save your changed settings automatically if no operation take place in 30 seconds.
Package Includes:
1 x DC Ammeter.
Take Note:
- Ensure the device is not exposed to extreme temperature changes and avoids vibration, oxygen, dust, water, oil, and chemicals.
- Check that the power supply voltage is within the rated range and the wiring terminals are not positive, as this can cause serious damage.
- The input wire should be minimal in length and shielded wire is highly recommended.
- Proper wiring is required, avoid proximity to high-voltage, high-current power supply lines.
- Preheat for 15 minutes before use. The suitable use environment temperature is 0~50°C.
- The device can be corroded by organic solvents, strong acids, and alkalis.
- Dismantling, modifying, or attempting repair on this product is strictly prohibited.
Check out detailed pictures of this product for a better understanding:
