Introducing: The remarkable 2-in-1 PH & ORP controller and monitor. This top-tier gadget provides simultaneous measurement and display of PH value and ORP (redox value). To deliver preciseness in results, this set comes with two detachable BNC electrodes (one for PH and one for redox), which allows for effortless replacement when the need arises.
Equipped with two relay output power sockets, this controller offers the liberty to plug in your custom 110V/220V device like an air outlet stone, O3 ozoniser, oxygen pump, CO2-regulator, electromagnetic valve, or other ORP & PH control devices. All you would need to do is feed in the preferred Hi/ Low PH/redox values in the controller. The controller is designed to control your device based on the entered values – if the measured PH or Redox value is less than your set value, your device will switch on. Conversely, if the measured value exceeds your set value, your device will automatically turn off.
Specifications you might find handy:
Measurement range:
PH: 0.00 ~ 14.00PH
ORP: -1999 ~ 1999mV
Accuracy:
PH: ± 0.1%+0.02PH
ORP: ±5mV
Resolution:
PH: 0.01PH
ORP: 1mV
Framework:
PH: 3.50 ~ 10.50PH
ORP: -500 ~ 500mV
Relay Contact: Works with both 5A AC 110V or 220V.
Optimal Working Conditions:
Operating Temperature: 0 to 50 °C or (32 to 122 °F)
Ambient Humidity: 90 or less than 90 % R. H.
Power Requirement: AC110V ±10% 60Hz / AC220V ±10% 50Hz
Power Consumption: 2 Watts
Voltage: Can work with 110V or 220V.
What’s inside the box?
1 x Dual Aquarium Controller for PH & ORP (Available in 110V or 220V)
1 x Detachable 300cm PH electrode
1 x Detachable 300cm ORP electrode
2 x Rubber cable holder with suction cap
1 x Metal wall hanger
1 x Mini-screwdriver
1 x English Operation Manual
Have a look at these detailed product images:
