Product Name: Self-priming Drill Pump Electric Drill Pump Oil Fluid Water Pump
Specifications:
Color: Black
Material: Engineering plastics
Dimension: 3.5×10.5×6.5cm / 1.4×4.1×2.6″
Pump shank: 8mm round shank
Transmission medium: Oil / Water / Fluid
Self-priming: 9ft
Impeller structure: Rubber impeller
Fitment: For electric drill
Features:
– This pump is designed to be compatible with both corded and cordless drills, fitting most electric drills. It effectively transforms any drill into a high-capacity pump that can drain sinks, aquariums, pool skimmers, and more.
– Its compact size, lightweight design, and easy installation make this electric drill powered pump a practical choice for home, garden, and outdoor use.
– It is ideal for transferring light liquids such as freshwater, seawater, oil, dilute organic solvents, insecticides, and liquid fertilizers.
– The pump features an engineering plastic body and stainless steel internal parts to prevent corrosion.
– It can self-prime up to 9ft(2.75m) and pump water to a maximum distance of 45ft(13.7m). It can pump up to 300 U.S GPH(1136L/hr) and connects to 1/2inch(1.3cm) diameter tubing.
Operation Instructions:
1. Apply a few drops of lubricating oil in the pump inlet before each use for optimal priming and longevity. Flush with clean water after each use.
2. Ensure the inlet hose is airtight and as short as possible. The inlet hose should not exceed 9ft (2.75M).
3. When pumping abrasive fluids or liquids with solids, use a strainer on the inlet line to prolong the pump’s life.
4. It is recommended to mount the pump to a surface for stability and ease of use.
5. Mount and start the drill. Monitor the inlet tubing to ensure fluid is drawn into the pump within 15-20 seconds. If not, check that the inlet tube is properly mounted to the inlet.
6. Do not run the pump dry. If the pump fails to prime, check that the hoses are not kinked or clogged. The pump relies on the fluid being pumped for lubrication.
Package Includes:
1 x Pump
2 x Connector
2 x Clamp
1 x Manual
