Product Name: Product id: –>
Description: Introducing a spring-loaded grease gun that’s easy to refill and comes with a robust steel nozzle, designed specifically for lubricating sprocket nose guide bars. The gun comes pre-loaded with grease for your convenience.
Specification:
Grease Material: Lithium-Based Grease
Capacity: 34g
Size: Approximately 3.5*16cm
Quantity: 1pc
Features:
* This grease is perfect for Chainsaw brush-cutters.
* It can reduce friction, boost performance, and prolong the lifespan of your chainsaw and brush-cutter.
* It helps prevent premature wear, particularly on chainsaw bar sprocket noses and brush-cutter head gearboxes.
* It’s easy to use: simply squeeze the grease tool and let the grease cover the chain guide bar or chain.
Operating Instructions:
1. Clean out the guide bar grease hole before using the lubricant.
2. Position the grease gun nozzle over the hole in the guide bar body.
3. Press down on the grease gun. Repeat until grease comes through the bar nose area, which usually takes about 3 to 5 pumps.
Tips:
All grease guns are susceptible to air locks, which can restrict grease flow. To rectify this, remove the plastic cap and apply even pressure to the plunger until grease fills the lower chamber. Then, re-install the cap and continue greasing.
Package Included:
1pc x Chain Guide Bar Grease
Notice:
1. Please allow a slight error due to manual measurement. Make sure you’re okay with this before bidding.
2. The color may vary slightly due to different display settings. Please understand.
More Details:
