Description
The device is a handheld 2in1 dual-channel digital fluorescence oscilloscope signal generator. It registers an analog bandwidth of 180MHz-3DB and a real-time sampling rate of 500MSPS in its oscilloscope function. It boasts a 20MHz DDS function signal generator with 14 standard function signals. The signal generator outputs an amplitude fixed at 1VPP. The frequency of its sinewave reaches up to 20MHz, while the rest of the waveform frequencies extend up to 10MHz. It contains 120Mbit of storage space that stores up to 250 waveform sets and 90 screenshots. It connects to computers via a USB cable, facilitating the viewing or copying of the saved BMP imaging file inside the oscilloscope.
Features
The 2in1 device contains a digital fluorescence oscilloscope signal generator. It houses a 2.8-inch IPS display, ensuring clarity in its color temperature display and multilevel gray-scale display. With a waveform refresh rate of 50000wfms/s, you can flawlessly capture signals leaving no room for abnormal waveforms to hide. It incorporates an accurate real-time trigger system with automatic, single, and regular trigger modes. The system also features rising-edge and falling-edge trigger modes alongside adaptive adjustable trigger suppression. This enables the device to manage high-frequency, low-frequency, and high-noise signals for clean, stable waveforms.
Other features include a large time base scrolling mode for monitoring slow level changes in real time, a ZOOM scaling time base, and a digital fluorescence XY mode. Notably, the device offers a 5mV high sensitivity ultra-high waveform signal-to-noise ratio, 20M hardware bandwidth limit, and special truncated output function. Additionally, its design allows for 400V high-voltage burn-in protections and supplies infrared power from its built-in, quick-charging 3000mAh rechargeable lithium battery that lasts for up to 4 hours.
It also extends simple spectrum display through FFT, waveform saving and screenshotting, and firmware upgrading and imaging export capabilities.
Specifications
The device, known as the 2in1 Oscilloscope Signal Generator, has a plastic casing. It supports English, Russian, and Portuguese languages and operates on 2 channels with a maximum sampling rate of 500MSPS. It holds an input impedance of 1MQ-18PF, and a vertical sensitivity of 5mV~10V(1X). Its test range extends from 40mV to 80V, and it supports an auto-adjustment feature, waveform manager, and ZOOM scaling time base. High voltage anti-burning extends across all gears, supporting up to 400V. The 2.8-inch screen displays with a resolution of 320 x 240, and the package size amounts to 245 x 147 x 80mm and weighs 680g.
Packing List
Along with the 2in1 Oscilloscope Signal Generator, the package also includes 2 probes, a USB cable, and a guideline.