Product Name: M5X0.8X6.7mm, M6X1.0X10.8mm, M8X1.25X10.8mm, M10X1.5X13.5mm, M12X1.75X16.3mm
Specifications: This product weighs 2 KG and has dimensions of 373*175*35mm.
Features:
1. Drilling:
– Start by clearing the damaged thread with a standard drill.
– For sizes up to M12(1/22”), the kit includes the appropriate drill.
– If you’re repairing a spark plug thread, there’s no need for pre-drilling if you use the special Spark Plug Tap.
– Note that for Fluteless Taps, larger holes are necessary.
2. Checking:
– Ensure that the thread and pitch of the tap and the bolt are a match.
3. Tapping:
– Use the special V-COIL-Taps to cut the holding thread into the cleared hole.
– We recommend using a suitable cutting oil for this process.
Installation of the Insert:
– Place the insert on the installation tool and adjust the ring so that the insert tang is centred in the tang slot.
– Wind the insert in with a slight downward pressure until it’s a half turn below the surface.
– Be careful not to work against the thread direction as the tang could break.
Package Includes:
– 5 Installation Tools
– 5 Break Pin Tools
– 5 Twist Drills
– 1 Hex Key
– 5 Taps
– 110 Wire Thread Inserts
– Bit HSS 424
– Tap HSS 4241
– Stainless steel screw sleeve
– Plastic tray
– Iron box packing
