Description
Our wireless receiver/transmitter is designed to reduce wire clutter and offers compatibility with numerous female plugs thanks to its male plug configuration.
Features
The DMX512 wireless receiver/transmitter transmits standard DMX512 protocol data from a console in a wire-free manner without time delay. This product operates on a 2.4G ISM frequency section and uses GFSK modulation for effective communication. This product supports 126 channels with a jumping frequency to ensure high anti-jamming ability and reliable operation. Users can set up to 7 groups of ID codes, offering individual wireless networks without any interference in the same place.
Specifications
– 2.4G wireless DMX512 R/T
– Input voltage: 5VDC 500mA MIN
– Receive Sensitivity: -94dBm
– Max Transmitting Power Rate: 20dBm
– DMX Connector: 3pin male, 3pin female
– Communication Distance: 400M (visible distance)
– Work Frequency Section: 2.4G ISM, 126 channels frequency section
– Plug Standard: US, EU plug (optional)
– Material: Zinc Alloy + Plastic
– Item Size: 21 * 2.5 * 2.5cm/8.26 * 0.98 * 0.98in (L * W * H) (1pc)
– Cable Length: 107cm/3.51ft
– Item Weight: 65g/2.29oz (1pc)
– Package Size: 14.5 * 10.5 * 4.5cm/5.7 * 4.13 * 1.77in (L * W * H)
– Package Weight: 317g/11.2oz
Operating Manual
The ID code and LED color have the following corresponding relationship:
1: RED,
2: GREEN,
3: RED+GREEN,
4: BLUE,
5: RED+BLUE,
6: GREEN+BLUE,
7: RED+GREEN+BLUE.
Press the momentary switch above the side led indicator to indicate ID setting. Press again to set IC, advancing the color ID code by 1 each time you press the switch. The LED light shows different working conditions:
- LED constant lit up: No DMX or wireless signal.
- Red LED flash: Transmitting.
- Green LED flash: Receiving.
The RF frequency range is 2.400 – 2.525G, with a total of 126 channels. It’s searching automatically. The product can only work under the same ID code of transmitter and receiver, which is indicated by the same LED color.
Establishing Communication
1. Power on the DMX512 wireless received board first, then the transmitted board.
2. Press “Key” button to set the same ID value on both the transmitted and received boards. Use different ID values for more than 1 group of wireless universals in the same place.
3. When the transmitter transmits DMX data by an uninterrupted frequency section, the red LED flashes, the receiver changes the communicated frequency section, and the green LED flashes until it receives the same ID value. The LED flashes faster with more DMX data.
4. Once the communication is done correctly, the communication is established.
Package List
– 2 * DMX Wireless Transmitter/Receiverunit
– 2 * Adapter (US EU optional)
– 1 * Specification (English)
