Product Name: –>
Our product is a versatile tool that caters to both your heating and shrinking needs. It efficiently handles duties such as providing relief to powdered heat or shrinking sheets. The method is simple: maintain a 3-5cm distance from the work and heat at about a 45 degree angle until it’s completed. As a finishing touch, blow the heat gun at a high temperature for a few seconds more.
Its benefits are twofold – it not only imparts hardness to the item but endows it with an attractive sheen. Although the temperature is not adjustable, it compensates by attaining an impressive 200 degree heat in a matter of seconds. Walker’s tip: do not operate this wonder tool for over 10 minutes and always blow at a 45 degree angle to avoid heat suck.
The specifics: Its dual-toned casing is a mix of black and white and it comes in a durable ABS casing. It functions at a constant temperature, working up to an impressive 200°C / 390°F within a fleeting few seconds. It is powered by an AC power supply and is rated at 230V, with 50Hz power. In theory, it can function for 8 minutes of time.
Operating it is a breeze. Simply plug the heat tool in, hold the gun without touching the hot nozzle. A distance of 5-6cm should be maintained between the heat gun and your work. Heat at about 45° until the completion of the work. Once done, turn off the power and let it cool down.
A few pointers to note: while the gun cannot adjust the temperature, it heats up quickly to approximately 200℃. Therefore, do not aim at your Polymer Clay Works for a long time to avoid any distortion. This heat gun, with its 300W low power, is not classified as a High Power unit. Yet, it is your best bet for jobs like heating shrinkable film, embossed powder, rubber stamp; it effectively replaces your toaster or oven. Once done, your polymer clay will turn hard and shiny.
The package contains: 1 x Hot Air Gun
For a clearer understanding, feast your eyes on these below-mentioned images:
