Product Name:
Product ID: –>
Features:
● Compatible with three different colors of wire, this device can extrude from a single nozzle and seamlessly switch between the three wires to create various colors.
● Offers stable print quality with a rich color output.
● Its clean internal cavity and clear pipeline prevent blockage.
● The mounting apparatus is versatile, with reserved mounting holes, allowing installation in x, y, and z directions.
● Comes with M3 mounting holes to accommodate 40 fans and 30 fans, making it user-friendly.
● Equipped with three sets of heating and temperature measuring holes for easy wire routing; the actual use requires two sets of heating rods.
Important Information:
- For first time use, manually feed the three different filaments into the extruder. Do not feed more than 10mm of filament at a time until regular printing has been established.
- During slice setting, the extruder should not be set to a waiting state with the pumping wait setting, as it may cause blockage.
- Limit the pumping setting to no more than 3mm.
- A fan is required for the heat sink to maintain forced heat dissipation. Keep it on during heating. Two sets of fans are recommended to ensure balanced heat distribution.
- Please note, the product is connected internally and there may be a slight risk of backflow.
Specifications:
• Suitable filament: PLA/ABS
• Feeding method: Remote feeding
• Adapting extruder: Compatible with bulldog, mk8, and other extruders.
• Dimensions: Main body φ42×54
• Weight: 168g
• Material: Aluminum alloy
• Voltage: 12v
• Cartridge Heater: 12v 40W
• Throat tube is equipped with an anti-blocking material Teflon tube.
Package Includes:
1 x 3-in-1 out extruder
1 x cartridge heater and temperature sensor
