3-Pack MKS-OSC Stepper Motor Controller with Pulse PWM Speed and Reversing Control for 3D Printers

Product Name:
Product ID:

Product Overview:
This product is a pulse generating module designed to act as a signal source for stepper drivers. To operate the stepper motor correctly, this module must be paired with the appropriate driver.

Properties:

1. The module forms a simple control platform when paired with an easy controller, stepper driver, stepper motor, and DC power.
2. The controller provides three distinct frequency signal options: 5.4k-160khz, 540-16.6khz, and 80-2.4khz. The desired frequency can be selected through skip-stitch selection.
3. The module supports the generation of both a pulse and PWM signal, with skip-stitch selection available.
4. Frequency measurement can be obtained via the two ports of PUL and common-cathode (or common anode).

Note: Different stepper motor drivers may have different port signs, but their functions remain the same.

ENA/FREE = EN = Enable
PULS = CLK = PUL = Pulse
CW/CWW = DIR = Direction

Connections for Common Anode (with B):

EN, PUL, and DIR are linked to the common anode port.
EN is connected to EN.
PUL is connected to CLK.
DIR is connected to DIR.

Connections for Common Cathode (with B):

EN-, PUL-, and DIR- are linked to the common cathode port.
EN is connected to EN.
PUL+ is connected to CLK.
DIR+ is connected to DIR.

The product package includes 3 x Stepper Motor Driving Controllers.

Images: