Product Name: 3Dtouch Bed Leveling Sensor
Product Id: —-
Introduction:
-
Simplicity: The 3Dtouch sensor displays simplicity through its small size and straightforward structure. Its key function is to act as an automatic bed leveling sensor, facilitating the collection of information and firmware settings.
-
Intelligent Features: The device performs a self-test by pushing the nail thrice when powered on. A built-in LED light flashes to alert if there are any issues detected during the self-test or operation.
-
High Precision: The standard deviation of 3Dtouch’s repeatability is approximately 0.005mm, ensuring precise operation.
-
Power-saving Innovation: The sensor is designed for super power-saving. In its idle state, no current flows through the solenoid valve, minimizing the standby current to an average of less than 15mA. The device operates under 300mA for about 100ms during sudden foot movements, significantly reducing Joule heating and preventing thermal issues.
-
Choice of Bed Material: The 3Dtouch sensor does not rely on any light or proximity (inductive/capacitive) sensors, instead uses Hall effect for optimal control. This allows for any type of material to be used for the bed.
-
Optimized Construction: 3Dtouch adopts a tech-intensive design, allowing it to have a larger setting for the build size compared to other existing automatic bed leveling sensors.
Features: 3Dtouch is a fully auto universal 3D printer bed leveling sensor. Its remarkable features included compactness, easy installation, high compatibility with all bed materials (like glass, metal, wood, plastic, and acrylic), and high precision.
Specifications:
- Voltage: 5V
- Current: 15mA
- Maximum (Peak) Current: 300mA
- Color: Semi-transparent Black
- Cable Length: 150mm
- Weight: 10g (0.35oz)
- Wiring: 3Pin (Black(-,GND), Red(+5V), Blue(Control Signal)) and 2Pin (Black(-,GND), Yellow(Zmin))
※ Operating Conditions: Requires one I/O (PWM or Software PWM) for control, one I/O for Zmin, and GND and +5V power.
The package includes:
- 1x Auto leveling sensor
- 2x M2.5 screw
- 2x M2.5 nut
- 1x Wrench
- 1x 2 pin DuPont wire
- 1x 3 pin DuPont wire
