Product Specifications:
- Operating voltage: DC 10V-45V. The use of a switching power supply of DC24V or DC32V is recommended.
- Rated maximum output: ± 4.5A
- Segments: step, half step, 1/4 steps, 1/8 steps, 1/16 steps, with a maximum of 16 subdivisions.
- Dimensions: 52mm width 82mm length 30mm height
Product Features:
- The output current is stepless adjustable to cater to a variety of applications.
- It includes an automatic half-flow function, supplemented by an easy-to-use automatic half-flow switch.
- It utilizes a 6N137 high-speed optic copler to maintain optimal performance even at high speeds.
- The TB6600HG chip provides a low-voltage shutdown, overheat shutdown, and an overcurrent protection circuitry. It also offers enhanced short-circuit protection compared to the TB6560.
- The back of the board displays a description of the subdivision settings.
- Output short circuit protection is included.
- Two input terminals make wiring more convenient and allow direct connection to MKS-Gen.
- Suits 42,57,86 two-phase, four-phase, four-wire, six-wire stepper motors within 4.2A.
- Again, it features an automatic half-flow function.
Notes:
- Power supply should not be reversed to avoid damaging the chip.
- The set current should not surpass the motor’s rated current.
Instructions:
- The operating voltage is DC 10V-45V, with a switching power supply of DC24V or DC32V recommended.
- Only one group can be entered in the two identical input terminals, simplifying the wiring process.
- An input pulse level of 5V requires a series of 1K resistance if 12V; if 24V level, a series of 2.4K resistance is needed.
- When CLK has a pulse, the motor operates. Without a pulse, it automatically enters the set half-flow state, locking the motor.
- When DIR is low level or floating, the motor runs forward; high level causes reversal.
- When EN is low level input or floating, it operates normally. A high level puts it offline.
- The white 4-PIN bayonet terminal can directly connect to the MKS-Gen’s signal output (mind the direction).
Package Includes:
1 x 3D Printing TB6600 42/57/86 Stepper Motor Driver (Note: The package does not include the motherboard and motor.)
Product Images:
