Product Specifications:
Frequency Response Input to STEREO OUT is +0.5 dB/-0.5 dB (20 Hz to 20 kHz) based on the nominal output level at 1 kHz. GAIN knob is set to minimum.
Total Harmonic Distortion Input to STEREO OUT is 0.01% at +8 dBu (20 Hz to 20 kHz), GAIN knob is set to minimum. It’s 0.003% at +18 dBu (1kHz), GAIN knob still set to minimum.
Hum & Noise Equivalent Input Noise is -128 dBu (Mono Input Channel, Rs:1500, GAIN knob: maximum) across 20 Hz to 20 kHz.
Residual Output Noise sits at -102 dBu (STEREO OUT, STEREO LEVEL knob at minimum). There is a Crosstalk (1 kHz) of -88 dB.
This product boasts of 6 input channels (Mono (MIC/LINE): 2, Stereo (LINE): 2) and 3 output channels (STEREO OUT: 2, PHONES: 1). It also features a stereo bus.
Mono Input Channel Function PAD offers 26 dB. HPF is at 80 Hz with a 12 dB/oct.
The EQ HIGH offers a Gain of +15 dB/-15 dB at 10 kHz shelving, whereas the EQ LOW provides a +15 dB/-15 dB gain at 100 Hz shelving.
The PEAK LED is activated when post EQ signal reaches 3 dB below clipping (+11 dBu). Level Meter Post STEREO LEVEL Knob is a 2x 7-segment LED meter that has 6 programs [PEAK (+11), +6, +3, 0, -3, -10, -20 dB].
Dimensions of the product are 149 mm x 62 mm x 202 mm (65.9 x 2.4 x7.9inch). The power source is derived from an internal digital effect (MGO6X) SPX Algorithm running on +48 V.
The accessible optional accessory is the Mic Stand Adaptor (BMS-10A).
The operating temperature for the product has been advised as 0 to +40°C. (Noise is measured with A-weighting filter. Crosstalk is measured with 1kHz band pass filter.)
The product is crafted in a combination of metal and plastic.
It comes with 6/8 channels for input, and is powered by a DC 5V 500mA power source. Power consumption is minimal at 2.5W.