Discover the versatility of our Electric Drill, a multi-functional tool that’s a must-have for any DIY enthusiast or professional. This tool is not just an electric drill, but also doubles as a screwdriver and an angle grinder.
1. Electric Drill Function: Perfect for drilling into wood, tile, metal, and glass.
2. Screwdriver Function: Ideal for working on appliances, doors, windows, and firmware installation.
3. Angle Grinder Function: Great for polishing, sanding, and cutting tasks.
4. Full Copper Motor: Equipped with overload protection for enhanced durability.
5. High Precision Three Jaw Chuck: Ensures a firm grip on your drill bits.
6. Flat Drill and Impact: Easily switch between modes with a single key.
Name: Electric Drill
Rated Power: 980W
1 x Electric Drill
Installation of Drill Bit:
1. Use a wrench to turn the chuck counterclockwise until it’s half-open.
2. Insert the drill bit until it reaches the bottom, then tighten clockwise.
3. Ensure all three holes are tightened for secure installation.
Installation of Angle Grinder:
1. Use a wrench to turn the chuck counterclockwise.
2. Twist until it’s half-open.
3. Insert the cutting connecting rod and tighten clockwise using a wrench.
4. Insert the black gasket.
5. Load the cutting blade.
6. Secure with white screws.
7. Tighten using a wrench.
8. Install a protective cover before installing the cutting blades to ensure safe operation.
Replacement of Carbon Brush:
1. Remove the carbon brush box and lay the built-in iron sheet flat.
2. Replace with a new carbon brush.
3. Press and hold the carbon brush and return it to its original position.
4. Both left and right carbon brushes need to be replaced.
5. Finally, unscrew the cover using a screwdriver.