Description
This product is capable of displaying wind speed and temperature measurement values at the same time. Users can choose from Celsius and Fahrenheit for the temperature unit. The wind measurement units are selectable and can be in any of the following: m/s, Km/h, mph, ft/min, knots. The device allows for the measurement of current, max, and average wind speed. It can also display wind speed in the form of a Beaufort wind scale bar graph.
Apart from these, the device has an LCD back light and can show the status of the battery quantity. The control buttons include Mode, °C/°F, and Set.
The operating instructions are simple. Introduce one CR2032 battery to the battery capsule to power up. Hold down the “Mode” button for two seconds to start up, and the screen will display temperature, current wind speed, and battery condition. The temperature unit can be switched by pressing “°C/°F”. If you press the “Mode” button for three seconds, “m/s” will start flashing, and then you can either switch the wind measure unit, or pick the current/max/average wind speed by pressing “Set”. Press “Mode” to recover.
Specification
The wind speed measure ranges from 0 to 30m/s，0 to 5860Ft/min，0 to 55Knots，0 to 90Km/s，0 to 65Mph. The resolution is 0.1m/s，19Ft/min，0.2Knots，0.3Km/s，0.2Mph. The accuracy ratio is ±5%.
The device’s temperature measure ranges from -10°C to 45°C or 14°F to 113°F. The resolution is 0.2°C or 0.36°F. The accuracy ratio is ±2°C or ±3.6°F.
The device operates best in a temperature and humidity of -10°C to 45°C (14°F to 113°F) or a relative humidity equal to or less than 90%. It can be stored in temperatures between -40°C to 60°C (-40°F to 140°F). The device consumes about 3mA of current. The required power supply is one CR2032 coin battery (not included with the product). The product’s weight is 56g, and its gross weight after packaging is 102g. The color is black.
What’s Included?
The package includes :
* One 2-in-1 wind speed anemometer
* A neckstrap
* A warranty card
