Product Name: Product ID: –>
This product is a water level controller that serves different purposes depending on the model. Let’s get into the specifics:
Models:
- DF-96B
- DF-96C
- DF-96D
These controllers all function under a working voltage of 220V for DF-96B and DF-96C. For the DF-96D, the working voltage increases to 380V. All models can carry a load current of up to 16A, except for DF-96B, which carries a maximum load current of 10A. An easy guide installation method is available for each model, and all three feature identical dimensions of 126x88x51 mm.
Regarding the wiring methods, you have a few options:
-
Direct control mode wiring: If the appliances you wish to control use a single-phase power supply and don’t exceed the switch’s rated capacity, you can utilize this mode. For a resistive load, the capacity is 10A, while an inductive load is up to 5A. See Figure 1 for appropriate wiring.
-
Single-phase expansion mode wiring: This method applies when the appliances use a single-phase power supply, and the power consumption exceeds the capacity of the switch. An AC contactor exceeding the appliance’s power consumption is necessary for expansion. You can see this wiring mode in Figure 2.
-
Wiring of three-phase working mode: For appliances that require a three-phase power supply, an external three-phase AC contactor is needed. The control contactor’s wiring diagram for this mode is AC220V, 50Hz, as per Figure 3.
As a bonus, your package will come with 1 x Automatic Water Level Controller.
To give you a better glimpse of what you’d receive, here are a few detailed photos:
