Slicer Settings Suggestion:
- Retraction speed: over 80MM/S.
- Retraction length: 2.5-4MM.
If you encounter issues with PLA clogging, consider the following steps:
- Accelerate the retraction speed. In case of speed limitation in the firmware, make modifications using “M203 E200”.
- Enhance the extruder acceleration by adjusting the firmware settings through “M201 E9000”.
- Depending on your machine setup, decrease the retraction length.
- Increase the nozzle temperature by 5-10 degrees.
- Do not fix the 2 supporting screws for the thermal block like in the standard hotend on the CR-10 printer.
- Ensure there are no spaces between the heatsink and the heat break.
Please note that the color of the silicone sock, included as a gift, will be chosen at random.
Package includes:
1 x Heatsink.
1 x Heat Break.
1 x Nozzle.
1 x Heating Block.