Product Specifications:
Model: CVM-WM300(A)
Transmitter TX:
- 96 Channels
- Group A Wireless Frequency: 520.000MHz – 548.500MHz
- Group B Wireless Frequency: 550.000MHz – 578.500MHz
- Signal/ Noise: 65dB+
- Antenna: 1/4 wavelength wire
- Transmitting Power: 10dBm/15dBm
- Stray Radiation: Less than -60dBc
- Sound Delay: Less than 20ms
- Audio Distortion: Less than 0.5%
- Battery Type: Polymer lithium 3.7V 2000mAh
- Dimension: 84 x 63.5 x 23mm
- Operating Temperature: 0℃ to 50℃
- Storage Temperature: -20℃ to 60℃
Receiver RX:
- 96 Channels
- Group A Wireless Frequency: 520.000MHz – 548.500MHz
- Group B Wireless Frequency: 550.000MHz – 578.500MHz
- Signal/ Noise: 65dB+
- Antenna: 1/4 wavelength wire
- Receiving Power: -95dBm
- Stray Radiation: Less than -60dBc
- Sound Delay: Less than 20ms
- Audio Distortion: Less than 0.5%
- Battery Type: Polymer lithium 3.7V 2000mAh
- Dimension: 84 x 63.5 x 23mm
- Operating Temperature: 0℃ to 50℃
- Storage Temperature: -20℃ to 60℃
Product Features:
- Dual Transmitters Triggered by One Receiver
- A/B Double Group Options
- 96 Channels for Working with Multiple Devices
- Working Distance: Up to 120m in open area, up to 80m in Barrier Area
- LCF Low Cut Filtering Mode
- Auto-scanning for Quick Channel Selection
- Manual or Auto IR Sync
- Adjustable RF Signal Strength
- Audio Dynamic Display Bar
- 16 Levels Volume Adjustment
- Transmitter Power Monitor
- Mono/Stereo Switchable Output Modes
- Built-in Rechargeable Lithium Battery
- Slim Body Design
- Low-consumption, Super-long Standby Time
- Lattice LCD Display, High Resolution
- Full Metal Manufacturing, Excellent Shielding
Please Note:
- For infrared code matching, keep within 1M distance to avoid weak communication and unsuccessful code matching.
- Before use, set the switch between stereo/mono in advance to avoid current interference by switching during use.
- The antenna will affect the working distance, so protect it from damage.
- The working distance will depend on the surrounding environment. For example, turn off the WIFI of the fuselage when the environment is open and free of interference.
- When using the product at close range, set the RF strength of this product to ‘LOW’. It will reduce power consumption and enhance battery life.
- For mobile phone shooting, you need to purchase the TRS-TRRS audio conversion cable separately.
- Some Android systems’ original ecological recording systems are not supported. It is recommended to use it in third-party APP mode.
- When inserting the battery, pay attention to the correct polarity. Incorrect polarity may result in the product being unusable or damaged.
- Store the product in a dry environment. Do not use the device in rain or humid environments as this could cause a short circuit.
Package Includes:
- 2 x Lavalier Transmitter
- 1 x Receiver
- 2 x 3.5mm Mic Audio Input Cable
- 1 x 3.5mm-3.5mm Audio Output Cable
- 1 x 3.5mm-XLR Audio Output Cable
- 2 x Micro USB Charging Cable
- 3 x Belt Clip
- 3 x Camera Cold-shoe Mount
- 2 x Wind Muff
- 1 x Portable Box
- 1 x User Manual