EMASTIFF 105dB Human Body Sensor Infrared Human Body Induction Remote Control Alarm Household Electronic Dog Alarm

$14.99

In stock

EMASTIFF 105dB Human Body Sensor Infrared Human Body Induction Remote Control Alarm Household Electronic Dog Alarm
EMASTIFF 105dB Human Body Sensor Infrared Human Body Induction Remote Control Alarm Household Electronic Dog Alarm $14.99

Free shipping on all orders

  • 30 days easy returns
  • Tracking information available on all orders
Guaranteed Safe Checkout

Precise details:Main Specifications:Detection range:distance 4-5 meters, angle 100 degreesWorking voltage:AC 220V (self-equipped adapter), DC 6V (4 AA batteries can be installed inside)Remote control distance:4-5 metersAlarm sound level:105dB (decibel) measured at 30cmProduct Features:1. Infrared detection alarm2. Infrared remote control, originally equipped with two remote controlsInstallation requirements:1. Because the remote control infrared warning device has the highest infrared detection sensitivity when the human body moves laterally relative to the lens, but the longitudinal movement sensitivity is poor, so pay attention to the angle and height of the detector’s horizontal plane when installing, which has a great impact on the protection area.2. When installing, avoid the infrared warning device close to the cold and heat sources, such as hot and cold air outlets, air-conditioning outlets, electric heaters, air coolers, etc., and avoid directly facing the door.3. The remote infrared warning device should be able to look directly at the protected area without obstacles.4. The remote control infrared warning device should form an angle of 10 to 30 degrees with the wall. At this time, the detection distance is the farthest. Adjust the installation angle according to the actual installation.Installation method:1. Fix the universal base at a distance of about 2 meters from the ground.2. Open the battery cover and install 4 AAA batteries in accordance with the marks inside the battery box.3. Fix the remote control infrared warning device on the universal seat and turn the infrared warning device to meet the installation requirements and detection needs.Instructions:1. Install the battery. Press the remote control once, and the machine makes a beep sound and the green light is on. It means that the alarm is ready to enter the working state. 2. The remote infrared warning device has a standby delay of 15 seconds when the green light is on, and no alarm signal is detected within 15 seconds. You must leave the detection area of ​​the electronic dog within these 15 seconds. 3. If someone enters the detection area of ​​the infrared warning device after 15 seconds, the red light will flash for 5 seconds. During this 5 second delay time, it is convenient for the owner to use the remote control to turn off the alarm. After 5 seconds, if no signal from the remote control is received, a harsh alarm will sound for 30 seconds, and the alarm volume will be 105 DB. 15 seconds after the end of the alarm sound, if someone touches the remote infrared alarm again, it will alarm again, repeating the cycle.4. When the remote infrared warning device alarms, you can use the remote control to close the detection circuit and end the alarm.

12345678910