Product Overview:
This is an FFC soft cable with a 0.5 pitch and 36pins. The pins refer to the number of copper cores. The pin direction is in the same orientation. The product comes in various cable lengths including 30cm, 70cm and 100cm.
The spacing refers to the distance between the centers of two needles. If you’re uncertain, you can calculate it by measuring the bus width which is given in millimeters. The formula for calculating spacing is: Bus width / (number of pins + 1).
The cable direction is labeled ‘A’ and follows the same direction orientation, i.e., the metal surface lies on the same side. This cable has been tested with a Lerdge board for a length of 2 meters without shielding tape. It’s been wound around the stepper motor and the touchscreen display operation remained normal, with no interferences observed; thus, the product passed this test.
Included in the package is 1 Display Cable that measures 100cm, 70cm, or 30cm.
Product Images:
Reviews
There are no reviews yet