Voltage:AC220-240V or AC100-130V
Frequency:50Hz / 60Hz
Temperature range:180~500℃/ 356~932℉
Heating type:Wmore ceramic element
Soldering iron tip:900M-B1.2
Soldering iron size:about 242 X 25 X 25mm
Package includes:1 x Adjustable temperature soldering iron
1 x Suction tin pump
1 x Tin wire tube
1 x Soldering iron stand
1 x Tweezers
1 x Wire stripper
1 x Battery
1 x Screwdriver
1 x PU handbag
1 x Multimeter
2 x Multimeter pen
2 x Electronic wire
5 x Soldering iron tip
Note:1. When the new soldering iron is used for the first time, there will be a slight smoke phenomenon. This phenomenon is caused by the heating element itself being dried. It is a normal phenomenon and will disappear automatically after about ten minutes.
2. When using the soldering iron, it must be equipped naturally. 3. Do not knock the soldering iron on the workbench to remove the residual tin dross. This may seriously damage the soldering iron.
4. Smoke will be emitted during welding, so the factory should prepare ventilation facilities.
5. It is not advisable to operate at high temperature for a long time during welding, otherwise the heating element is easy to burn out. If necessary, use tweezers to clamp the pin to help heat dissipation
6. Remove the soldering iron tip after using the other and remove the oxide layer, so as not to replace the oxide layer in the future, the soldering iron tip cannot be removed. Warm reminder:The soldering iron should be covered with tin before and after use to prevent oxidation. Do not have impurities on it during use. The tip of the soldering iron is easily damaged by hitting it, so it can be wiped gently on the high temperature sponge.