Description
The pH-2 Pro Meter pH is a ground-breaking product, functioning similarly to litmus paper, and features a color-changing backlight display.
Features
This pH meter is:
Easy to Use: Dip the pH meter electrode in the solution you want to test. The reading rapidly appears on a sizeable LCD display.
Auto Calibrated: Calibration is complete with the touch of a button.
Fast and Accurate: Avoid the hassle of color charts and test strips.
Compact Portable Design: This product can easily fit in a bag or pocket for convenient transport.
Wide Application: It is perfect for use in any aquarium, fishing industry, swimming pools, spas, school laboratories, food & beverage industries, and drinking water.
Operation
Follow these steps for operation:
- Remove the protective cap and protective film from the screen.
- Rinse the electrode with distilled water and dry it with filter paper.
- Press the “ON/OFF” key to turn the meter on.
- Immerse the pH meter electrode in the test solution, ensuring not to exceed the immersion line.
- Stir gently and wait for about 30 seconds for the reading to stabilize.
- After testing, clean the electrode with pure water and turn off the meter by pressing the “ON/OFF” key.
- Always replace the protective cap after use.
Calibration
Follow these steps for calibration:
- Prepare a pH calibration solution.
- Fill three clean containers with 250ml of distilled water each.
- Add 6.86 in the first container, 4.00 in the second container, and 9.18 in the third container.
- Stir gently until the powder has dissolved.
- If an accuracy of ±0.1pH is required, calibrate the pH meter at 6.86 point.
- If an accuracy of ±0.01pH is required, calibrate the pH meter at three points (6.86 & 4.00 & 9.18)
Note: Recalibration is necessary under the following conditions:
- During extended periods of inactivity.
- With frequent use.
- If the testing accuracy requirement is very high.
- If the “CAL” (calibration) button was pushed and the electrode exposed to air for an extended period of time.
Maintenance
Always replace the protective cap after using the digital meter to prevent the electrode from drying out due to excessive exposure to air, which could lead to slow or unstable readings. If the electrode dries out, immerse it in distilled water for several hours.
Specifications
- Model: pH-2 Pro
- Material: ABS
- Measure Range: -2.00~16.00pH (generally in 0.00-14.00pH)
- Calibration Mode: 3-point auto-calibration
- Resolution: 0.01pH
- Accuracy: ±0.01pH
- Power Supply: 2 * 1.5V (LR44 button cell)
- Operating Temperature: 0℃~80℃ / 32℉~176℉
- Reset Function: Turn it on, press the ON/OFF key for 3 seconds, and then release it. When “—-” appears on the screen, the reset is successful.
- ATC Function: Automatic temperature compensation function
- Power-off Storage Function: The data will be automatically saved after the battery is pulled out and stored for one month.
- Litmus Test Function: The LCD color changes according to the pH value, similar to a litmus test stripe.
- Item Size: 155 * 32 * 18mm
- Item Weight: 58g
- Package Weight: 120g
- Package Size: 17 * 5.5 * 3cm
Package List
- 1 * pH meter
- 3 * Calibration Powder
- 2 * Button Cell
- 1 * User Manual (English)
