Introducing –, the innovative solution to your water testing needs. This tool consists of 4 electrolytic bars – 2 iron bars and 2 aluminum rods. Each group has a positive and a negative pole, allowing the simultaneous testing of two different liquid samples. The convenience factor is just one of the many perks this product offers.
— offers the ability to determine various water impurities by displaying a variety of colors. The color spectrum includes yellow, green, blue, red, white, and black, each signifying a distinctive type of water impurity. Importantly, a yellow color indicates that the water is healthy and uncontaminated.
This product is commonly employed by numerous sectors, such as water laboratories, the CDC, the aquaculture industry, hospitals, swimming pools, and even for household tap water quality testing.
Technical Specifications:
Color: Black
Size: Approximately 9.8cm x 2.5cm x 4cm
Cable Length: 85cm
Voltage: AC 220V
Plug Type: The corresponding adapter will be provided based on your geographical location.
Analysis Colors and Meanings:
Black: Heavy Metals
White: Lead, zinc, mercury, inorganic dirt
Yellow: Dissolved acids, fluoride, and other organic matter
Green: Arsenic, mercury, lead, copper, sodium
Blue: Bacteria, carcinogens, chemical fertilizers, pesticides, etc.
Red: Iron, rust, and bacteria
The Testing Process:
Step 1: Prepare testing water in two 100-150ml white glasses. Fill one with tap water and the other with R/O water and place them side by side on a desk.
Step 2: Ready for testing – place the electrolyser on a glass and plug it into a 220V power source.
Step 3: Initiate the testing – power on the electrolyser and start testing.
Step 4: The testing time is typically 30 seconds. Upon completion, power off and remove the electrolyser.
Precautions:
- Avoid touching the electrode after powering on.
- Refrain from inserting fingers into the testing water.
- Keep the children away from the electrolyser.
- Always dry the electrode and water on the iron pole with a gauze after use, then store it carefully.
- As the second and forth detectors are made of iron, we highly recommend you to wipe the water on them to prevent rusting.
Testing Standards:
- No smelly or harmful materials, especially heavy metals and organics.
- Appropriate water hardness, usually ranging 50-200mg/L.
- The pH value shows alkalescence (7.0-8.0).
- Moderate content and proportion of microelement and mineral substances that are close to normal solution.
- Moderate dissolution content of oxygen and carbon dioxide (dissolved oxygen in water≥6-7mg/L).
- Strong nutrition and physiology function (including dissolution capacity, penetrability, diffusibility, metabolization capacity, emulsifying capacity, detergency, etc).
What’s included: 1 x Water Electrolysis
Detailed Images:
