Unveiling the exquisite KSGER T12 Soldering Station! Let’s explore its impressive specifications and functionalities:
Specifications:
– Input Voltage: AC110-240V
– Power Supply: 24V 5A
– Temperature Range: 40-500℃
– Tin Melting Time: Output Power 72W
– Auto Sleep feature: Yes
– Boost Function: Yes
– Controller: STM32 Digital
– Size: 150 x 88 x 38mm
– Case Material: ABS Plastic
Operating Instructions:
This versatile gadget boasts of 4 working modes: Boost mode, working mode, sleep mode, and shutdown mode.
1. Short press to enter the Boost mode. The time and temperature of the Boost mode can be customized within ranges of 5-100 degrees and 1-30 minutes respectively.
2. The working mode offers a working temperature range of 40-500 degrees. The maximum is limited to 550 degrees while it defaults to 300 degrees.
3. Double-click to switch into sleep mode. Sleep time and temperature can be set between 0-60 minutes and 40-300 degrees, respectively.
4. In the shutdown mode, simply triple-click to turn off the unit. The shutdown mode stops the heater from heating after it starts.
Menu Options: You can press and hold the encoder for 3 seconds to enter the menu. The following are the options available for customization:
P-0 Boost temperature setting (default 50 degrees)
P-1 Boost time setting (default 5 minutes)
P-2 Sleep temperature setting (default 200 degrees)
P-3 Sleep time setting (default 10 minutes)
P-4 Shutdown time setting (default 30 minutes)
P-5 Temperature calibration (split into three points: 400, 330, 260 degrees)
P-6 Restore default settings
Working Description:
The display will show ‘ERR’ if there’s no T12 Handle or tip inserted into the soldering station or if there’s an issue with the T12 tip or handle. When everything is properly set up, the display will show the temperature. The indications for each mode are specific: the first decimal point is always on in “Boost” mode, while the last decimal point is always on in “Sleep” mode. In sleep mode, you can wake it up either by short-pressing the encoder or by activating the vibration switch. Only a short press of the button can wake it from shutdown mode.
Buzzer Indication:
Short sounds will be emitted when the set temperature is reached. There will be a long sound for entering boost mode and special sound combinations for different modes: entering sleep mode would prompt one long and two short sounds, and entering shutdown mode would prompt one long and three short sounds.
Package Includes:
– 1 x KSGER T12 Soldering Station
– 1 x 907 Soldering Handle
– 1 x T12-K Tip
Details Pictures:
