Please note:
✯ Ensure the positive and negative poles are properly connected before applying power.
✯ Do not plug or unplug the motor and driver while it is powered on as it can damage the driver. Avoid adjusting the current while the motor is running. The best practice is to disconnect the power supply, unplug the motor, then power on, adjust the potentiometer, and measure the voltage on the potentiometer until the measured voltage matches the expected value. Avoid installing the anti-driver as it can burn out the driver and motherboard.
✯ During the firmware burning process, it is recommended to not connect the USB cable and 12V power at the same time. Connect the 12V power only after burning through the USB cable.
For more details, visit our GitHub page: https://github.com/makerbase-mks/MKS-GEN_L
The package includes: 1 x Motherboard
