MKS Robin Nano with MKS Roboin TFT3.5 Touch Screen Kit 3D Printer 32Bit ARM Control Board Support Marlin2.0

Description

Package Included:1 x MKS Robin Nano 32Bit ARM Control Board  1 x MKS Roboin TFT3.5 Touch Screen  Open Source File/Instructions:https://github.com/makerbase-mks/MKS-Robin-Nano
The latest firmware V2.0.0 for Robin Nano is released:click to open 
Robin Nano error type:Err1:The hot bed exceeds the maximum temperature limit, please check whether the thermal interface is shorted;Err2:The nozzle exceeds the maximum temperature limit, please check whether the thermal interface is shorted;Err3:The hot bed exceeds the minimum temperature limit, please check whether the thermal interface is disconnected;Err4:The nozzle exceeds the minimum temperature limit, please check whether the thermal interface is disconnected;Err5:The heating of the nozzle fails. If the nozzle does not reach the set temperature difference within the set time, an error will be reported; please check the configuration file settings or check whether the power supply is sufficient;Err6:The heating of the heating bed fails. If the heating bed reaches the set temperature difference within the set time, an error will be reported; please check the configuration file settings or check whether the power supply is sufficient;Err7:Thermal runaway; when the temperature reaches the target temperature, the current temperature is lower than the target temperature value within the set time and exceeds the set temperature, an error will be reported; please check whether the thermal sensitivity is normal or whether the PID value is appropriate.