Digital Ammeter Voltmeter Peacefair PZEM-026 AC Single Phase 400V 100A Electronic Load Smart Voltage Tester

$12.99

In stock

Peacefair PZEM-026 AC Single Phase 400V 100A Digital Ammeter Voltmeter Electronic Load Smart Voltage Tester
Digital Ammeter Voltmeter Peacefair PZEM-026 AC Single Phase 400V 100A Electronic Load Smart Voltage Tester $12.99

Free shipping on all orders

  • 30 days easy returns
  • Tracking information available on all orders
Guaranteed Safe Checkout

Presenting clarity on‌ how‌ to utilize the​ PZEM-026 Voltage Tester.

To⁢ begin with, let’s talk about Voltage measurements. This tester’s range is from 40 to 400V. You will ‍find that if ⁣your ‌voltage is ​less than​ 100V, the display will show a decimal value such ​as 80.0V. If your ‌voltage‍ is​ greater or equal to 100V, you will get a‍ whole number display like 220V. The accuracy you ​can expect ⁣is ±1%.

Now let’s ⁢move onto ⁢the Ampere measurement. ​The range here goes ​from⁢ 0 to 100A. If⁤ your Ampere ⁢is less than 10A, it would display‍ a decimal value such as 1.00A. Between 10A and‌ 100A, it will show ⁢in a​ format like‍ 10.0A and if it exceeds a 100A, it would show 100A. Its​ starting measurement is at 0.02A and its accuracy falls‌ within ±1%.​

For‌ user-friendly experience, this⁤ tester includes a backlight ‍control feature. ⁤By simply giving a short press to ‍the key, you​ can turn ‌the ⁣backlight on ⁢or off as per your requirement.

An excellent feature ‌of this tester is its ‘Error Adjustment’. We‍ make it⁤ a point to calibrate the product⁣ 100% ​before delivery, however, users ‌have ⁤the option ​to ⁤manually⁣ adjust errors, ‌by ‍following these steps:

Step 1: Long press the key ⁢for approximately 3 seconds ⁢until you see the screen⁤ digit flash. Once this happens,⁢ release the key.
Step 2: ​When ‌the digit starts to⁢ flicker, it means the error adjustment⁤ state has⁤ been entered. You will notice⁣ the ‌digit cycle flashing​ in the ⁢following sequence:

  • voltage high digit
  • voltage middle digit
  • voltage low digit
  • voltage decimal point
  • ampere high digit
  • ampere middle digit
  • ampere low digit
  • ampere decimal ‌point
    (Note: The flicker indicates the current adjustable digit. ‍To adjust ⁣the⁣ value, short‌ press the key. The digital cycle will then run from‍ 0-9 with a decimal point shift)
    Step 3: Once​ you‍ have made the adjustment, ‍long press ​the key again for about 3 seconds. The screen will​ display ‘PASS’ and⁤ revert back to the normal display interface, signifying successful​ adjustment.

Here’s what’s included in your purchase – a single PZEM-026 Voltage ⁤Tester.

Now take a look ​at ⁢these detail pictures⁤ to get a better understanding‌ of ‍the product:

12345678910111213141516171819