Description
Features:
- Safety arming feature: The motor does not engage after battery connection, irrespective of the throttle stick position.
- Throttle calibration function: User-programmable throttle range compatibility with varying transmitters.
- Multiple procedure methods support: The procedure can be executed through the transmitter stick or LED procedure Card, and undergo timing modifications to accommodate different brushless motors.
- Mini Servo: This is a widely popular mini servo weighing just 9 grams, delivering torque of 1.5-1.7kg/cm (4.8V-6V) which is considerably strong for its size.
- Full protection: The device is equipped with low voltage cutoff, over-heat and throttle signal loss protection.
Specification:
ESC Parameters:
- Current: 40A
- Output Capacity: Continuous Current 40A, Short-time Current 55A (not less than 10 secs)
- Power Input: 2-4 Lithium Batteries (Batteries Not Included)
- BEC Output: 5V@3A (Linear Regulator Mode – Linear Mode)
- Maximum Speed: 210,000 rpm for 2-pole Motor, 7000 rpm for 6-pole Motor, 35,000 rpm for 12-pole Motor
- Size: Approximately 68x25x8mm
9g Servo Parameters:
- Size: 21.5mmX11.8mmX22.7mm
- Weight: 9 grams
- No Load Speed: 0.12 sec / 60 deg (4.8 V)
- Locked-rotor Torque: 1.5-1.7kg/cm (4.8V-6V)
- Operating Temperature: -30~~+60 degrees Celsius
- Dead Zone Setting: 5 Microseconds
- Working Voltage: 4.8V-6V
Motor Parameters:
- KV: 1400KV
- Ri(M Ω): 0.033
- Battery: 2-3Li-Po
- Max Power: 342W
- Test Prop: 7×3/7×4
- Motor Size: 27.5x38mm
- Shaft Diameter: 3.17mm
Package Information:
- Package Size: 7*5*2cm
- Package Weight: 135g
- Packaging: Plastic
Packing List:
- 1* 1400KV Motor
- 1* 40A ESC(T Plug)
- 2* 9g Servo
- 2* 8060 Propeller
- 1* Some Other Fittings
