Product Name: Product ID: –>
Master the Art of Dent Repair:
1. Initiate the process by thoroughly cleaning the dent area with alcohol and a cloth. This ensures a clean surface for the subsequent steps.
2. Next, plug in your glue gun (with a glue stick inserted) and patiently wait for 3-5 minutes. If you don’t own a glue gun, it’s highly recommended to invest in one for this process.
3. Now, select the appropriate black dent tabs for your dent size. Apply the glue to these tabs. Remember, larger dents will require larger tabs.
4. Carefully place the glued dent tab over the dent location.
5. Align the black tabs with the PDR bridge screw holes. Screw the cap onto the tabs and tighten it until the small pit is completely repaired.
6. Finally, twist off the nut and remove the pulling bridge. Use alcohol and a rubber scraper to clean any residual glue.
Package Included: 1 x Set Black Pulling Bridge
Detail Pictures:
