Product Name: Universal Flush Fitting Kit
This Universal Flush Fitting Kit is designed to streamline the process of flushing A/C systems. The kit includes clamp assemblies and support plates that can be easily installed on most A/C line or tube ends, allowing for the attachment of the flushing apparatus.
The support plates are cleverly designed with slots to accommodate different size tubes or line nuts. The chamfered area on the support plates ensures the flared end of the tubes sit level, allowing the sealing cone to be seated without slipping or causing damage to the tube end.
The best part? You don’t need any tools to seat the sealing cone into the fittings or tube ends. However, if a sealing cone is damaged by tools, it will need to be replaced.
Technical Specifications:
Material: PA Plastic, Electroplating iron, Aluminum
Box Color: Red
Box Dimensions:
Length: 355mm/14″
Width: 260mm/10.2″
Thickness: 85mm/3.3″
Installation of the Sealing Cone:
1. Select the correct support plate to fit the tube or line fitting. Tighten the clamp screw until the cone is seated tightly against the end of the tube or line fitting on the A/C component.
2. Hold the clamp screw by hand and rotate the forcing nut an additional 1/8 to 1/4 turn. This ensures a leak-tight seal for the flushing operation.
To remove the clamp assembly, hold the clamp screw and back off the forcing nut. This will free up the sealing cone without damaging the end of the cone.
If you’re using adapters on a tube or fitting that is too small for the sealing cone to enter, replace the cone-shaped seal with the concave seal.
To replace the sealing cone, hold the forcing nut and back out the clamp screw until the cone is pulled out the end of the clamp screw. Insert the desired sealing cone into the end of the clamp screw, and tighten the screw until the cone bottoms in the screw, using the non-slotted support plate against the end of the cone.
CAUTION: Do NOT use pliers or other tools to twist the sealing cone out of the clamp screw, as this could damage the sealing cone.
Please Note:
1. There may be a 1-3mm error due to manual measurement. Please ensure this is acceptable before purchasing.
2. The color may vary slightly due to different display settings.
Package Includes:
2 x Clamp Assembly
2 x Support Plate (1/2″ OD tube)
2 x Support Plate (5/8″ OD tube)
2 x Support Plate (3/4″ OD tube)
2 x Support Plate (7/8″ OD tube)
2 x Support Plate (No slot)
More Details:
