Description: This secondary curing machine is a post-processing unit specifically designed to complement light-curing 3D printed products. Featuring a knob timer, rotating tray, and compact lightweight design, these features allow for uniform curing, resulting in dry, hard product surfaces. This equipment is crucial for casting materials.
Features:
- Compact and lightweight design
- Knob timer for precise control
- Rotating tray ensures uniform curing
- Curing in water to minimize shrinkage, deformation, and enhance surface hardness
- Specifically designed for use with Resin 3D printers DLP / SLA / LCD in post-curing stages
Specifications:
- Equipment dimensions: W220 D200 H315mm
- Package dimensions: W290 D260 H410mm
- Equipment weight: 6 KG
- Maximum range: D155 * H100mm
- Timing: 2-60 minutes
- Curing band: 400-405nm
- Curing method: Curing in water
- Power supply voltage: Input 110/220, output 12V
- Frequency: 50 / 60HZ
- Power: LD050 = 50W
- Operating environment: Well-ventilated and dust-free area; Temperature: 0 ℃ -35 ℃; Humidity: 20% -80% (non-condensing)
- Storage conditions: Temperature: 0 ℃ -40 ℃; Humidity: 10% -80% (non-condensing)
Instructions:
a. Initial setup: Check the machine for any damages after unpacking. Position the device on a flat, stable surface.
b. Usage: Fill the water tank to approximately 70% capacity and position it on the turntable inside the machine. Place the model in the tank, then set the timer switch. General materials often require around 5 minutes of curing time, while casting material may need 30-60 minutes (depending on the material’s properties). Upon hearing a ‘ding-dong’ sound, the model can be removed. Please ensure no water flows into the device.
Troubleshooting:
- If the turntable does not rotate, inspect the screws for looseness. Tighten them if necessary.
- If the LED light keeps flashing, a. check the power supply for any problems, b. ensure the power cord socket is functioning correctly.
Package includes:
- Curing Machine
- Power supply
- Power cord
- Water tank