Product Title: Product ID: –>
►Click here to download the English manual.
Exciting Features:
- Enjoy the combination of a multimeter and signal source in a single piece.
- Features loop detection function.
A. Offers simultaneous 24V loop supply and current measurement.
B. The in-built 250 ? HART loop resistor eliminates the need for separate load resistors. - Discover the analog output function.
A. The 4~20mA current setting is digit-wise, with manual step output function.
B. The SIMULATE function imitates the transmitter.
C. You can display in both mA and percentage.
D. High output accuracy of 0.2% is presented in 5 digits. - Measurement capabilities:
A. AC and DC voltage, resistance, DC current, diode, and continuity.
B. Your measurements are accurate within 0.5% and displayed in 5 digits for current and 4 digits for others.
C. Fast measurement rate: 2.5 times per second.
D. The measurements can be displayed in mA and percentage.
E. Data retention function for your convenience. - Uses advanced panel calibration technology.
Specifications:
Experience a four-digit display (or five-digit during current measurement and output). It refreshes at a rate of 2.5 times per second.
Operational temperature and moisture range: 0 to 40 ºC, and relative moisture is ≤85% (no condensation).
Storage temperature and moisture range: -20 ºC to 60 ºC, relative moisture is ≤90% (no condensation).
Required accuracy temperature and moisture range: 23±5ºC, relative moisture is ≤75% (no condensation).
Temperature co-efficiency: 0.1 × basic accuracy / ℃ (temperature range 28℃).
Continuity/open test: Beeper sounds for resistance readings below threshold, or to indicate momentary open circuit.
Take note that it uses two AA 1.5V Alkaline (LR6) batteries, which are not included. The product has an impressive DC current output (SIMULATE) of about 50 hours and a DC current output (SOURCE) of 20mA (1000Ω load) of around 2.5 hours.
Battery life: When alkaline batteries are used: measures any parameter: lasts for about 100 hours. If the battery is low, the battery symbol will be displayed.
Automatic power-off: Defaults to 5 mins if no operation is performed. This is adjustable. Preheating time operates on 10min.
Package activates one multimeter.
Behold the product in its finest form:
