Product Name: Product ID –>
Features:
- The remote control operates on a 2.4G keypad function.
- It is equipped with an Infrared keyboard function.
- The remote includes an Air mouse function (if applicable).
- Has a Voice control function for hands-free use.
- Features an Infrared learning function which is operable through the ‘power’ button.
- LED backlight function provides clear visibility.
Pairing Instructions:
(The remote controller and receiver have been pre-paired. If they lose connection, follow these instructions.)
- Insert the receiver into the USB interface.
- Hold down both the “ok” button and the ‘return’ button on the remote simultaneously for about 3 seconds to enable pairing mode.
- The LED red light will flash quickly during pairing mode, and will stop flashing once pairing is successful.
- Pairing must succeed within 1 minute (red light will stop flashing). If not, it will enter sleep mode after 15 seconds.
LED Light Indicator Status:
- Not paired: The red light flashes slowly. Press once, the red light flashes once. Hold down button and the light will stay on.
- When voice control is activated, the red light flashes slowly.
- Low battery is indicated by the red light flashing quickly.
Cursor Speed Regulation:
- From slow to fast: Press and hold ’ok’ and’+ ‘buttons simultaneously, release them after the red light flashes twice slowly. Cursor speed will increase by one level.
- From fast to slow: Press and hold ’ok’ and ‘-‘buttons simultaneously, release them after the red light flashes twice slowly. Cursor speed will decrease by one level.
- This mouse cursor has 4 speed levels in total, with the default set at the third level. More instructions for speed regulation will not be provided once the speed reaches the maximum or minimum level.
Air Mouse Calibration:
- Manual calibration: Press ‘ok’ button and insert the battery. Place the controller flat on a surface and allow it to calibrate. After a few moments, the LED light will flash slowly three times to confirm calibration completion, and then the light will go off.
Stand-by and Sleep Mode:
- Non-paired devices will enter sleep mode after 15 seconds of inactivity.
- Failed pairings will cause the air mouse to directly enter sleep mode after 60 seconds.
- If the air mouse is activated during pairing process and there is no operation for 15 seconds, it will enter sleep mode.
- Same rule applies if the mouse is deactivated during the pairing process.
Special Key Function:
- The ‘ok ’button serves different purposes depending on whether the air mouse is activated or deactivated.
- Short pressbutton to delete, press and hold for 3 seconds to activate/deactivate the backlight function.
Infrared Learning Function:
- Long press the power button until the red light starts flashing slowly after 3 seconds. This signals that the remote is in infrared learning mode.
Clear Infrared Code:
- Press and hold the two buttons simultaneously for 5 seconds. The quick flashing of the red light indicates that the learned infrared code has been cleared and factory settings have been restored.
Low Battery Indication:
- When battery level falls below 1.9v, the quick flashing of the red light signals low power.
Product Specifications:
- Transmission mode: 2.4G wireless
- Transmission distance: >10 meters.
- Amount of buttons: 24
- Battery types: AAA x 2
- Product size: 1564315.3MM
- Product weight: 47g
- Note: Ensure batteries are always sufficiently powered. Low battery power affects the sensitivity of the air mouse or may render it unusable.
- Use Distance: The actual usage distance of the air mouse may vary based on surrounding environment. Make sure the receiver is not obstructed by metal or other electronic devices.
Package Includes:
- 1 x MT1 Voice Control Airmouse
- 1 x USB Dongle
