Description
This product is a full-wave band radio receiver featuring a clean 0.96 inch OLED display. It uniquely offers an auto-hold setting function that holds settings even after power loss. The radio receiver supports 3.5mm earphones with its audio output function and also facilitates 4ohm speaker output of up to 2W. With 22 preconfigured commercial and amateur radio bands, this receiver offers users free wide-band access.
Features
- A clear 0.96 inch OLED display.
- Auto-hold function that retains settings after power failure.
- Integrated 3.6V, 600mAH polymer lithium battery for stable, long-lasting power.
- USB rechargeable, with a type-C recharging cable provided.
- Audio output function with compatibility for 3.5mm earphones.
- Capability to support 4ohm speaker 2W output.
- SMA interface for the antenna, with a retained SI4735 package on the printed circuit board. The chip is replaceable and the software compatible.
- A wide range of 22 commercial and amateur radio bands for open use.
- FM, AM (MW and SW) and SSB (LSB and USB) supported.
- Audio bandwidth filter options: 0.5, 1, 1.2, 2.2, 3 and 4Khz.
- BFO control available.
- Frequency step switch options: 1, 5 and 10KHz.
Specifications
- Name: Radio Receiver
- Material: Printed circuit board
- Band frequency options listed as follows: FM_BAND_TYPE, LW_BAND_TYPE, MW_BAND_TYPE, SW_BAND_TYPE for various meter lengths.
- Item size: 89mm 107mm 41mm
- Item weight: 205g
- Package size: 173mm 122mm 52mm
- Package weight: 250g
Packing List
- 1 Radio Receiver
- 1 Antenna
- 1 Type-C Cable
