Product Name: Duet 2 Wifi v1.04
This latest version of the Duet 2 Wifi v1.04 possesses a range of advanced features that make it a key asset for masking 3D printers and other CNC machines. This evolved version of the previously popular Duet 2 Ethernet now provides WiFi connectivity, offering previously unavailable versatility. Other features of this device and a full feature description can be read from our documentation, which include:
- A powerful 32 Bit Processor
- A dedicated Wifi module
- TMC2660 stepper drivers for super quiet functioning with up to 256 micro stepping
- Support for a high-speed SD card, and a secondary SD external card (if needed)
- Dual extruders found on the mainboard, with room for an additional 5 more on the expansion board
- High Power rating with a capacity for 2.8A motor current (software limited to 2.4A)
- Specifically designed bed heater channel for high current (18A)
- Onboard web interface accessible from any PC, tablet, or smartphone on the same network
- The ability to set up your printer and update the firmware through the web interface
- Support for all commonly used 3D printer geometries
- Capability to expand up to 7 extruders accompanied by Firmware support for mixing nozzles and remapping axes to accommodate high power external drivers
- PanelDue support for a seamless full-colour graphic touch screen experience
- Comes with Molex compatible plugs and crimps in addition to ferrules for power and heater terminals
The Duet 2 Wifi also includes support for the PanelDue – a colour touch screen controller designed to optimize the way you control your 3D printer. This screen operates on a 5V power from your host 3D printer controller. It facilitates connections to the external SD card socket included on most displays via a 10-way ribbon cable connector. The screen connects to your controller board through a 4-wire cable for the serial and power connections.
A 4.3″, 5″, or 7″ SSD1963 LCD panel is required for the operation of the control board without a screen. For this setup, directions provided on David Crocker’s PanelDue blog must be adhered to.
This modified DuetWifi is produced by Think3dPrint3d and Esher3d, however, it is not endorsed or supported by these companies.
The package includes the following items:
- Cloned Duet 2 wifi v1.04
- 5-inch PanelDue screen
- Connected cable
- 10 jumpers
- 8 4pin plugs
- 6 3pin plugs
- 7 2pin plugs
- 5 Heatsinks
