Product Name: Product ID:
The product features a control angle that offers 360° action (infinite position). The pitch and heading control angles are also 360° infinity, while the roll controllable angle allows ±30° adjustments using the horizontal adjustment key. When the fully following mode is active with a horizontal handgrip, you can use the joystick to control roll 360° rotation.
The product is designed with versatility in mind. The left and right sides of the motor can be used depending on the camera’s size and weight. The 1/4-inch screw is used to select the corresponding camera mounting hole to secure the camera.
The pitch axis and the center of gravity of the roll axis and the heading axis are balanced with adjusted vertical and horizontal directions.
The leveling standard for the camera is that it can be stopped at any angle without needing hand adjustment. However, the pitch axis must be adjusted to equilibrium.
The front of the mounting plate has a 1/4 inch tapped hole suitable for mounting followers or other accessories. The bottom of the fixed plate has a USB interface that can be connected to the follower, while the rear has a 3.5mm interface suitable for connecting to the camera shutter.
The heading motor has a 1/4-inch tapped hole for fitting accessories, and the bottom of the handle has the same 1/4 inch tapped hole for tripods or other accessories. The load-bearing range varies from 250g/0.55lb to 2800g/6.17lb, including lens accessories considering the center balance.
The package comes with:
- 1 x Feiyu Tech AK2000 Gimbal
- 1 x Micro USB Cable
- 1 x Release Cable for Sony
- 1 x Shutter Release for Canon (N3)
- 1 x Release Cable for Panasonic (L1)
- 4 x 18650 Battery
- 1 x Metal Tripod
- 1 x 4-Slot Charger
- 1 x Fixed Hand Screw (short)
Images of the product are included below:
