Introducing our Portable Pressure Washer Cleaner, a versatile tool that comes with a Water Pipe, Foam Pot, Long Brush, Long Pole, and Extension rod. This compact power washer is designed to make cleaning tasks around any water source, such as a bucket, pool, or lake, a breeze.
The washer operates at a working pressure of 200 PSI and features a dual-mode operation that allows you to switch between cleaning and watering tasks swiftly. It comes with a long pole that delivers 360 degrees of water penetrating power, making spot cleaning effortless.
The multi-functional spray nozzle lets you adjust the water stream’s degree. The larger the degree, the smaller the water stress, meaning that the “0” degree spray is the strongest.
Voltage: 12V DC
Current: 5 amps
Maximum pressure: 1.0Mpa
Range: 8-10 meters
Flow capacity: 4.5L / min
Power connector: car cigarette lighter
Water Flow: 8L
Tube Length: 6M/236.2″
Hose Inlets Outer Diameter: 10mm / 0.39
Hose Outlets Outer Diameter: 18mm / 0.71
Operating the washer is simple. Hold the knob switch, and the engine will start automatically, with the water pressure following suit. Loosen the knob, and both the motor and water will stop simultaneously.
Please note the following precautions for use:
1. The washer should not be soaked in water.
2. The pressure adjusting screw should not be adjusted. The pressure has been set correctly at the factory, and any random adjustment could increase the return pressure, leading to a burst water pipe.
3. An inlet filter device must be installed to prevent the introduction of impurities, which could cause a pressure drop or block the water outlet.
4. The washer is not resistant to oil corrosion. It should not pump gasoline engine oil, diesel kerosene.
1 x Washing pump
1 x Water Sprinkler
1 x 3m power cable
1 x 1.5m water inlet hose
1 x 6m water outlet hose